Datasheet4U Logo Datasheet4U.com

ALN2400 - Low Noise Amplifier

General Description

The plerow ALN-series is the compactly designed surface-mount module for the use of the LNA with or without the following gain blocks in the infrastructure equipment of the mobile wirelss (CDMA, GSM, PCS, PHS, WCDMA, DMB, WLAN, WiBro, WiMAX), GPS, satellite communication terminals and so on.

Key Features

  • ¡¤ 25 dB Gain at 2400 MHz ¡¤ 18 dBm P1dB ¡¤ 35 dBm Output IP3 ¡¤ 1.1 dB Noise Figure ¡¤ Operating at Single 5 V Supply ¡¤ 80 mA Current Consumption.

📥 Download Datasheet

Datasheet Details

Part number ALN2400
Manufacturer Unknown Manufacturer
File Size 603.91 KB
Description Low Noise Amplifier
Datasheet download datasheet ALN2400 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ALN2400 Internally Matched LNA Module Advanced Semiconductor
ALN2401 Internally Matched LNA Module Advanced Semiconductor
ALN2450T2 Internally Matched LNA Module Advanced Semiconductor
ALN2017 Internally Matched LNA Module Advanced Semiconductor
ALN2044AT Internally Matched LNA Module Advanced Semiconductor

Other Datasheets by Unknown Manufacturer

Part Number Description
ALN2040 Low Noise Amplifier
ALN0859 Low Noise Amplifier
ALN0925 Low Noise Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PlerowTM ALN2400 Low Noise Amplifier Features ¡¤ 25 dB Gain at 2400 MHz ¡¤ 18 dBm P1dB ¡¤ 35 dBm Output IP3 ¡¤ 1.1 dB Noise Figure ¡¤ Operating at Single 5 V Supply ¡¤ 80 mA Current Consumption Description The plerow ALN-series is the compactly designed surface-mount module for the use of the LNA with or without the following gain blocks in the infrastructure equipment of the mobile wirelss (CDMA, GSM, PCS, PHS, WCDMA, DMB, WLAN, WiBro, WiMAX), GPS, satellite communication terminals and so on. It has an exceptional performance of low noise figure, high gain, high OIP3, and low bias current. The stability factor is always kept less than unity over the application band in order to confirm its unconditionally stable implementation to the application system environment.