Datasheet4U Logo Datasheet4U.com

AN5010 Datasheet Tv Electronic Channel Selection Circuit

Manufacturer: Unknown Manufacturer

Overview: AN501 Vishay Siliconix The DG535/536 Wideband Multiplexers Suit a Wide Variety of Applications Introduction Analog switch IC’s traditionally have found limited use in applications involving high-frequency analog or digital signals. Degradation of switch performance and intolerable signal cross-talk between channels has undoubtedly forced many designers to use bulky electromechanical switches or costly discrete designs. At best, analog switch ICs configured in L or T arrangement could be adopted. However, increased board space and layout plexity became major problems in configuring systems with high channel density. The DG535/536 are pact 16-channel, single-ended multiplexer ICs, primarily designed as a cost-effective solution to video and wideband switching problems.

Datasheet Details

Part number AN5010
Manufacturer Unknown Manufacturer
File Size 91.87 KB
Description TV ELECTRONIC CHANNEL SELECTION CIRCUIT
Datasheet AN5010_ETC.pdf

General Description

A functional block diagram of the DG535/536 is shown in Figure 1 and the switch configuration is shown in Figure 2.

The device is fabricated using self-isolated, silicon-gate D/CMOS technology.

This process enables the logic interface and driver circuitry, the gating and latching stages, and the switching elements to be bined in a monolithic structure.

Key Features

  • low off and on leakage currents, reducing switching errors. Document Number: 70608 03-Aug-99 6-3 AN501 Vishay Siliconix TABLE 1.

AN5010 Distributor