Datasheet4U Logo Datasheet4U.com

CCSL-3 - Low Power Loss LED Driver

This page provides the datasheet information for the CCSL-3, a member of the CCSL-1 Low Power Loss LED Driver family.

Datasheet Summary

Description

Min.

Max.

Typ.

Features

  • Constant Current Specification: 25mA, 50mA, 75mA, 100 mA.
  • Constant Current Voltage Range: 2.0V-40V.
  • Current Control Accuracy: ±10% D.
  • Turn-on Voltage: 2-4V.
  • Working Voltage Range: 220VAC-265VAC S a TO-252 b TO-220 DS c Device Symbol.
  • Very Little EMC Radiation Electric Parameters (@TJ=25℃) D: Current Input Port, S: Current Output Port Item NO. CCSL-X Symbol △VDSM △VDSC △IP.

📥 Download Datasheet

Datasheet preview – CCSL-3

Datasheet Details

Part number CCSL-3
Manufacturer ETC
File Size 144.81 KB
Description Low Power Loss LED Driver
Datasheet download datasheet CCSL-3 Datasheet
Additional preview pages of the CCSL-3 datasheet.

📁 Similar Datasheet

  • CCS-18 - Normally Open Coaxial Switch (Teledyne)
  • CCS-32 - Latching Coaxial Switch (Teledyne)
  • CCS020M12CM2 - Silicon Carbide Six-Pack (Three Phase) Module (Cree)
  • CCS050M12CM2 - All-Silicon Carbide Six-Pack (Three Phase) Module (Cree)
  • CCS15S30 - Schottky Barrier Diode (Toshiba)
  • CCS15S40 - Schottky Barrier Diode (Toshiba)
  • CCS801 - Ultra-low power multi-gas sensor (CMOS Sensors)
  • CCS801 - Ultra-Low Power Analog VOC Sensor (ams)
  • CCS803 - Ultra-low power gas sensor (CMOS Sensors)
  • CCS811 - Ultra-Low Power Digital Gas Sensor (ams)
Other Datasheets by ETC
  • CCSL-1 - Low Power Loss LED Driver
  • CCSL-2 - Low Power Loss LED Driver
  • CCSL-4 - Low Power Loss LED Driver

Full PDF Text Transcription

Click to expand full text
CCSL-1/2/3/4 Low Power Loss LED Driver For AC LED Lamp NEON uses the world first patented N-MOS depletion device, CCSL series, which supply constant current from 2 to 50 volts for LED lighting application. This series product connected in series with string of LED lights can be connected directly to the output of AC line voltage after full bridge rectifying. It will provide minimum power waste (< 2 %) at normal AC voltage when the number of LED lights is properly chosen so that the total voltage across the LED string is slightly below the normal AC rectified voltage minus the CCSL turn-on voltage. CCSL series product serves as voltage and current protection device for all LED lights in series with it. It is also an energy efficient and environmental friendly LED driver.
Published: |