CM2545X111R-00 Datasheet | Unknown Manufacturer

Features : Protected by one or more of the following US Patents: 5,455,552 and 5,568,111 - High current capability (10 amps continuous operation) - Up to 170 ohms impedance @100MHz or 300 ohms @1GHz - Parts available in both thru-hole (B) and surface mount (R) versions - Parts available in broad band and high frequency materials - Economical mon mode EMI filtering - pact size Applications: - Filtering DC power on PC boards, especially in applications of greater than 3.0 amperes - Filtering mon mode EMI on high speed differential lines such as network and SCSI subsystems - Cost sensitive designs - Applications where low DCR is needed Part & Test Specifications: - Maximum current ratings (I MAX) are determined by testing to a maximum temperature rise of 40o C with continuous operating current - Board level ponents are rated up to a maximum of 75 volts - Part performance is shown with curves for mon, Open and Normal Mode Impedances measured along two conductors. mon Mode Impedance is the impedance of EMI noise conducted in the same direction along two conductors. Open Circuit Impedance is the impedance measured across a single leg of the mon mode choke. Normal Mode Impedance is the total impedance to the differential circuit (both out and back). Tested with: - HP4396A (100KHz - 1.8 GHz) or HP8753 (to 6 GHz) Network/Spectrum Analyzer - HP43961A Impedance Test Kit - HP16192A Test Fixture or Inter-Continental Microwave custom fixtures - HP16200A DC Bias Adapter - Philips PM2811 DC Power Supply - Ambient Temperature 23.5o C + 2o - Bandwidth 3 k Hz - Sweep Time 423 ms - Impedance is rated at + 25% @100MHz PART NUMBERING SYSTEM PRODUCT SERIES CODE PART SIZE CODE RATED CURRENT CODE IMPEDANCE VALUE CODE PACKAGING CODE -...