CPU001-BB Datasheet | Unknown Manufacturer

Features This version of CPU001 provides: 2. 3. Support for intelligent I/O modules. Scaling function blocks. Two new function blocks can be used to scale input data. One function block is for unipolar (unsigned) input data. The other function block is for bipolar (signed) input data. 66.80mm (2.63in) The CPU with power supply attached fits into a 70mm deep enclosure. Rated thermal specifications for the CPU module is based on a clearance of 2” above and below the equipment and 1” to the left of the CPU module. Drum Sequencer function block. This new function block works like a mechanical drum sequencer. It allows a sequence of output binations to be selected in turn. See the heading “The Drum Sequencer Function” for more .. information. Installing the CPU on the DIN Rail The CPU and connecting carriers must be installed on the same section of 35mm x 7.5mm DIN rail. The rail must have a conductive (unpainted) finish for proper grounding. For best stability, the DIN rail should be installed on a panel using screws spaced approximately 6 inches (5.24cm) apart. The CPU snaps easily onto the DIN rail. No tools are required for mounting or grounding to the DIN rail. Before joining module carriers to the CPU, remove the connector cover on the righthand side of the CPU. Do not discard this cover, you will need to install it on the last carrier, to protect the connector pins from contamination and damage during use. Specifications Size I/O Discrete Points I/O Analog Words Registers Discrete Internal Bits Discrete Temporary Bits Global Discrete Bits Program Memory Boolean execution speed Floating Point Override Built-in ports Built-in munications Type of memory storage Battery-Backed Real-time Clock Realtime clock accuracy (used for timers or timer contacts) Time-of-day clock accuracy 2.63” (66.8mm) x 5.04” (128mm) 2048 In, 2048 Out 128 In, 128 Out 2048 words 1024 points 256 points 1280 points 12288 bytes 1.8ms/K...