CWS-4001A Datasheet | Unknown Manufacturer

5 .064 [1.626]MAX .26 [6.604]MAX 4 WHERE SHOWN, USING A PERMANENT MARKING METHOD MARK PART NUMBER AND REVISION BOTTOM CORE LOCATED AS SHOWN 6 APPLY ONE KAPTON TAPE TO COVER THE EDGES OF 6 THE SMT LEADS MUST REST FLAT ON PCB, CO-PLANAR FILL WINDING AND CORE WITH EPOXY 2 PART A&B (600°F,315°C) 5 REMOVE INSULATION AND TIN LEADS APPROX. 0.1 INCH HELIX WIND 3 TURNS TIGHT TO CORE AND EVENLY SPACED CONSTRUCTION: HI-POT (2 SECOND, 5m A MAX.) 300 VRMS WINDING TO CORE DCR = 4.0 MILLI-OHM, MAX. CURRENT RATING = 12 AMPS DC, MAX L= 2.0 u H ± 10%, 10 KHz, 0.250 Vrms, 0 AMPS DC SPECIFICATIONS: .35 [8.9] MAX. TOP VIEW 2 KAPTON TAPE .08 [2.0] .26 [6.6] MAX. 6 KAPTON TAPE SCHEMATIC .12 [3.1]±.03" .1 [2.54]±.03" SIDE VIEW .20 [5.1] MAX. .08 [2.0] .19 [4.8] FOOT PRINT EPOXY: 2 PARTS A & B (600°F, 315°C) WIRE: UL RECOGNIZED 200°C RATED MAGNET WIRE, JIS C3102 CWS BYTEMARK OR OTHER APPROVED PART, CORE: MPP HELICAL COIL RATING 200°C REQUIRED MATERIAL: UL RECOGNIZED 94V-0 FOR FLAMMABILITY COILWS , INC 1 CWS Coil Winding Specialist. 12 Amps Output Choke (1.5 mm x 0.4 mm...