FLEX405 Datasheet | Unknown Manufacturer

Description The Gamewell Flex 405 is a 24-volt, five-zone Fire Alarm Control Panel FACP) with built-in municator and remote-site upload/download capability. The integral municator transmits event information (alarms, troubles, supervisories, faults, etc.) to a UL-Listed central station. The Flex 405 may be used in a variety of cost-effective applications, including: local fire alarm control panel (municator disabled), fire alarm control panel/ municator, stand-alone sprinkler supervisory municator, or slave municator to a UL-Listed host fire alarm panel (requires normally-open dry contacts to trigger five channels). Selectable transmission formats allow the Flex 405 to municate to virtually all central stations. .. Features - Five programmable Initiating Device Circuits (zones). Each zone may be programmed for: two-wire smoke detectors, normally open contact devices (pull stations, heat detectors), four-wire smoke detectors, waterflow operation, supervisory operation, auto-reset supervisory operation. - Two built-in, Class A or B (Style Z or Y) Notification Appliance Circuits (NACs). NACs may be programmed: silenceable, nonsilenceable (a strobe circuit can keep flashing after the panel is silenced), auto-silence (program 5 to 30 minutes), silence inhibit (60 seconds), coding (march time, temporal, California). - 3.0 amps of notification appliance power, expandable to 5.0 amps (meets the critical power requirements for ADA and UL-1971 devices). - Two built-in Form-C Alarm and Trouble relays. - Supervisory and munication fail outputs. - Dual-line rotary- or Touch-Tone®-dial DACT interfaces to public telephone network (leased phone lines are not required). - 24-Volt operation. - Built-in voltmeter measures: zone voltage; primary AC line voltage; battery voltage; NAC(s) voltage; resettable 24-volt power. - Surface Mount Technology (SMT). - Fully programmable via built-in keypad (no costly external programmers necessary). - plies with NFPA 72 (Local, Central Station...