FMR202
feature enables the user to operate single channel transmitters on either of the two channels. The supply and antenna connections to the receiver are via a three-way screw-type terminal block, with a separate six-way terminal block for the relay connections. The receiver can be clipped to a Quick Mount enabling the receiver to be easily mounted against walls, roof, etc. As an antenna, a piece of any type of wire, approximately one meter long, will be sufficient for a reliable control range of up to 180 metres, with our FM-... series transmitters. A longer wire or a proper 27 MHz CB-Antenna should further improve performance in reception. The two-way code switch (See below picture) allows individual control of each relays output mode. In the momentary mode the output relays are only activated while the correct signal is received. In the flip-flop mode the output relays are toggled with every correct ining signal. This enables the direct use for switching on/off lights etc. In flip/flop...
