Unknown Manufacturer GM5115
ONPANEL LCD PANEL CONTROLLER
DESCRIPTION
● Initial release. gm5115/25 Preliminary Data Sheet Date March 2001 June 2001 C5115-DAT-01C C5115-DAT-01D C5115-DAT-01E C5115-DAT-01F● In Table 18 corrected description of OSC_SEL (on pin ROM_ADDR13). It should be set to 1 to indicate usage of a single-ended clock oscillator.
● Corrected image and orientation of logo in pin out diagram Figure 2.
● Added section 4.11.3.
● Replaced all occurrences of CVDD with CVDD_2.5, including pin numbers 26, 88, 134 and 203 to make them consistent with the names of other 2.5V voltage supply signals.
● Pin number 205 name changed from GPIO16/HFS to GPIO16/HFSn and all occurrences of HFS replaced with HFSn to reflect the fact that this signal is active low.
● Added description of 2-wire serial protocol in section 4.17.2 and Table 24.
● Removed “Read with Increment” operation description.
● Corrected mechanical specification in Figure 32.
● Changes to Table 21 – DC Characteristics: - Maximum voltage for 5V-tolerance inputs is 5.5V. - Added maximum current requirements.