• Part: HMJ7
  • Description: The Communications Edge
  • Manufacturer: Unknown Manufacturer
  • Size: 59.03 KB
Download HMJ7 Datasheet PDF
Unknown Manufacturer
HMJ7
HMJ7 is The Communications Edge manufactured by Unknown Manufacturer.
Features - +34 d Bm IIP3 - 60 d Bc Spurious Rejection in IF - - - - - - Product Description The HMJ7 is a high dynamic range, Ga As FET mixer. This active broadband mixer realizes a typical third order intercept point of +34 d Bm at an LO drive level of +21 d Bm. The HMJ7 also provides excellent suppression of spurious intermodulation products, greater than 60 d Bc. The HMJ7 es in a low cost, J-Lead package. The bination of high dynamic range and spurious suppression, makes the HMJ7 an ideal choice for CATV headend transmission equipment and other applications requiring a broadband mixer in the 1000 MHz to 2000 MHz frequency range. Functional Diagram 22 21 2019 18171615 1413 12 Band RF 1000-2000 MHz LO 1000-2000 MHz IF 10-1000 MHz +21 d Bm LO Drive Level +5V Bias (40 m A) Low Cost Surface Mount J-Lead Package 1 2 3 4 5 6 7 8 9 10 11 Function Pin No. Function Pin No. Ground 1 Ground 12 IF 2 LO 13 Ground 3-9 Ground 14-20 +5V DC 10 RF 21 Ground 11 Ground 22 Specifications Parameter Frequency Range: RF LO IF SSB Conversion Loss Noise Figure Isolation: LO-RF LO-IF RF-IF IIP3 Return Loss: RF Port LO Port IF Port Spurious Rejection Input P1d B LO Drive Level DC Current at +5V Bias Units MHz MHz MHz d B d B d B d B d B d Bm d B d B d B d Bc d Bm d Bm m A Minimum 1000 1000 10 8.5 10.5 21 24 30 24 30 24 34 10 5 14 60 23 21 40 Typical Maximum 2000 2000 1000 9.5 Condition RF = 1018 MHz (0d Bm) Test conditions unless otherwise stated: RF = 1018 MHz (-10 d Bm), LO = 1017 MHz (21 d Bm), IF = 50-860 MHz and 25˚C. Absolute Maximum Ratings Parameter Operating Case Temperature Storage Temperature Maximum Input Power Rating -40 to +85°C -65 to +100°C 25 d Bm Ordering Information Part No. HMJ7 HMJ7-PCB Description High Dynamic Range FET Mixer (Available in tape and reel) Fully Assembled Application Circuit 1. Operation of this device above any of these parameters may cause permanent damage. 2. Total sum of LO port and RF port power should not exceed 25 d Bm. WJ munications, Inc. - Phone:...