ICX489AQF Datasheet | Unknown Manufacturer

High-Resolution 7.24M-Pixel Diagonal 9.107 mm (Type 1/1.8) Color CCD for Consumer Digital Still Cameras Supports VGA Moving Picture Imaging The demands for higher pixel counts and further miniaturization continue to increase in the rapidly growing digital still camera market. To respond to these demands, Sony has developed the ICX489AQF diagonal 9.107 mm (Type 1/1.8) CCD image sensor that Features 7.24M effective pixels. The ICX489AQF takes full advantage of the latest fine fabrication technologies to achieve a 2.35 µm unit pixel size. This results in both higher resolution and further miniaturization. Sony's unique horizontal and vertical pixel addition technology allows the ICX489AQF to provide both 7M-pixel still picture and 30 frames/s VGA moving picture imaging. I I Primary color filters, 28-pin SOP Diagonal 9.107 mm (Type 1/1.8) Provides 7.24M effective pixels (3112H × 2328V) 5-field readout method High sensitivity: 168 m V (G signal) High saturation signal: 385 m V The ICX489AQF is a 7.24M-effective pixel diagonal 9.107 mm (Type 1/1.8) CCD image sensor that was developed for use in high-resolution consumer digital still cameras. It provides high-resolution image capture when a mechanical shutter is used. Figure 1 presents Sony’s lineup of CCD image sensors for consumer digital still cameras. Since the ICX489AQF is positioned as a higher pixel count version of the earlier Sony ICX455AQF (diagonal 9.04 mm (Type 1/1.8), 5.13M effective pixels) product, it allows a 7Mpixel digital still camera to be imple- mented based on an earlier ICX455AQF camera without changing the optical system. Table 1 lists the ICX489AQF device structure, and table 2 lists the imaging characteristics. Timing Generator IC Sony also provides the CXD3630GA timing generator IC that includes built-in horizontal and vertical drivers for the ICX489AQF. In addition to a VGA equivalent moving picture mode, this IC also supports a high frame rate readout mode and an AF mode as...