IL358
IL358 is Low Power Dual Operational Amplifier manufactured by Unknown Manufacturer.
TECHNICAL DATA
Low Power Dual Operational Amplifier
The IL358 contains two independent high gain operational amplifiers with internal frequency pensation. The two op-amps operate over a wide voltage range from a single power supply. Also use a split power supply. The device has low power supply current drain, regardless of the power supply voltage. The low power drain also makes the IL358 a good choice for battery operation. When your project calls for a traditional op-amp function, now you can streamline your design with a simple single power supply. Use ordinary +5VDC mon to practically any digital system or personal puter application, without requiring an extra 15V power supply just to have the interface electronics you need. The IL358 is a versatile, rugged workhorse with a thousand-andone uses, from amplifying signals from a variety of transducers to dc gain blocks, or any op-amp function. The attached pages offer some recipes that will have your project cooking in no time.
- Internally frequency pensated for unity gain
- Large DC voltage gain: 100d B
- Wide power supply range: 3V ~ 32V (or ±1.5V ~ ±16V)
- Input mon-mode voltage range includes ground
- Large output voltage swing: 0V DC to VCC-1.5V DC
- Power drain suitable for battery operation
- Low input offset voltage and offset current
- Differential input voltage range equal to the power supply voltage
ORDERING INFORMATION IL358N Plastic IL358D SOIC TA = 0° to 70° C for all packages.
LOGIC DIAGRAM
PIN ASSIGNMENT
PIN 4 = GND PIN 8=VCC
MAXIMUM RATINGS-
Symbol VCC Parameter Power Supply Voltages Single Supply Split Supplies VIDR VICR ISC TJ Tstg IIN TL
- Value 32 ±16 ±32 -0.3 to 32 Continuous 150 -55 to +125 50 260
Unit V V V
Input Differential Voltage Range (1) Input mon Mode Voltage Range Output Short Circuit Duration Junction Temperature Plastic Packages Storage Temperature Plastic Packages Input Current, per pin (2) Lead Temperature, 1mm from Case for 10...
