Datasheet Details
| Part number | LPD-8806 |
|---|---|
| Manufacturer | Unknown Manufacturer |
| File Size | 2.40 MB |
| Description | driver chips are designed for the LED lighting system |
| Datasheet | LPD-8806 LPD-8803 Datasheet (PDF) |
|
|
Overview: - 8803/8806 Datasheet LPD LPD- LPD8803/LPD8806 as a new generation of driver chips are designed for the LED lighting system, which uses industrial grade CMOS process, providing multi-channel constant current driver and grayscale modulation output, it is programable, LPD8803 and LPD8806 output 3chanhel and 6 channel respectively,signal particularly suitable for discrete multigray full-color lighting system. 1. Constant current driving mode, the default driving current is 18mA, supporting LED lighting voltage up to 12V. 4. Unique data clock regeneration mechanism, super signal drive capability, support cascading length over 2000 pixels. 7. The seven output polarity is Optional ,support an external drive or as a source of high-power LED driver circuit. Applications 2. PWM signal generator 3. LCD backlight driver Pin Figure Gr ee LPD8803 1. LED decorative lighting system led 8. Industrial-grade design, input signal processing Schmidt, strong anti-interference performance. Ele 6. Built-in 256 independent PWM grayscale control circuit for each channel, 1024 grayscale effect can be achieved by programming. ctr 5. Built-in 1.2M oscillation circuit, support FREE-RUN mode, easy to programable design (refresh rate greater than 4000Hz). on LPD8806 3. Two-wire control mode, the shift clock up to 20MHz. ic 2. LPD8803 support three-way output (pin downward patible with LPD6803), LPD8806 support the six outputs (pin arrangement conducive to single-panel layout).
This datasheet includes multiple variants, all published together in a single manufacturer document.
| Part number | LPD-8806 |
|---|---|
| Manufacturer | Unknown Manufacturer |
| File Size | 2.40 MB |
| Description | driver chips are designed for the LED lighting system |
| Datasheet | LPD-8806 LPD-8803 Datasheet (PDF) |
|
|
|
s SDI: Serial data input, built-in pull-up SCLK1: Serial clock input, built-in pull-up OUT1-OUT6: Drive output SD0: Serial data output ,the strong internal drive output SCLK0: Serial clock output, strong internal drive and renewable output VCC: Power supply voltage is 3.3-5.5V, remend an external the 10uF decoupling capacitor NC: Empty feet GND: Ground Limit Parameters Remended Working Parameters Gr ee led Ele ctr on ic PMOD: Control single-pixel output, P
| Part Number | Description |
|---|---|
| LPD-8803 | driver chips are designed for the LED lighting system |
| LPD3806-360BM | Incremental two-phase rotary encoder |
| LPD680 | 3 channel constant-current driver and grey-level modulate output |
| LPD6803 | LPD6803 |
| LPD6803 | 3 channel constant-current driver |
| LPDA-8003 | LPDA-8003 Log Periodic Dipole Antenna |
| LPDA-8003 | LPDA-8003 Log Periodic Dipole Antenna |