Datasheet4U Logo Datasheet4U.com

MXT2482SX - 450 kHz Synchronous Rectified Step-Down Converter

General Description

The MXT2482SX is amonolithic synchronous buck regulator.

The device integrates 150mΩ MOSFETS that provide 2A continuous load current over a wide operating input voltage of 4.5 to 23V.

Current mode control provides fast transient response and cycle-by-cycle current limit.

Key Features

  • .
  • 2-2.5A Output Current.
  • Wide 4.5-23V Operating Input Range.
  • Integrated 150mΩ Power MOSFET Switches.
  • Output Adjustable from from 0.925 to 20V.
  • Up to 95% Efficiency.
  • Programmable Soft-Start.
  • Stable with Low ESR Ceramic Output Capacitors.
  • Fixed 450KHz Frequency.
  • Cycle-by-Cycle Over Current Protection.
  • Input Under Voltage Lockout.
  • Thermally Enhanced 8-Pin SOIC/SOIC-E Package APPLIC.

📥 Download Datasheet

Datasheet Details

Part number MXT2482SX
Manufacturer Unknown Manufacturer
File Size 540.71 KB
Description 450 kHz Synchronous Rectified Step-Down Converter
Datasheet download datasheet MXT2482SX Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MXT2088 8-bit dual-channel 100MSPS A/D converter MXTronics
MXT211 Two-phase brushless DC motor driver MXTronics
mXT2113TG-AB Touchscreen Controller Microchip
mXT2113TG-AT Touchscreen Controller Microchip
MXT224 maXTouch 224-channel Touchscreen Sensor ATMEL Corporation

Other Datasheets by Unknown Manufacturer

Part Number Description
MXT2482SXA 450 kHz Synchronous Rectified Step-Down Converter
MXT2022 12-Bit 1.6GSPS Analog to Digital Converter
MXT276 2-phase brushless DC motor driver
MXT1117 Low Dropout Linear Regulator
MXT319 Single Coil Hall circuit

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
2-2.5A, 23V, 450 kHz Synchronous Rectified Step-Down Converter MXT2482SX/A DESCRIPTION The MXT2482SX is amonolithic synchronous buck regulator. The device integrates 150mΩ MOSFETS that provide 2A continuous load current over a wide operating input voltage of 4.5 to 23V. Current mode control provides fast transient response and cycle-by-cycle current limit. An adjustable soft-start prevents inrush current at turn-on. In shutdown mode, the supply current drops below 1µA. This device, available in an 8-pin SOIC package, provides a very compact system solution with minimal reliance on external components. PACKAGE REFERENCE FEATURES . . . . . . . . . . . • 2-2.5A Output Current • Wide 4.5-23V Operating Input Range • Integrated 150mΩ Power MOSFET Switches • Output Adjustable from from 0.