PHE427 Datasheet | Unknown Manufacturer

- Double metallized film pulse capacitor, polypropylene dielectric - According to IEC 60384-17 Grade 1.1 TYPICAL APPLICATIONS High frequency applications with high current stress, such as deflection circuits in TV-sets, protection circuits in SMPS and in electronic ballasts. CONSTRUCTION Polypropylene dielectric with double metallized polyester film as electrodes. Encapsulation in self-extinguishing material meeting the requirements of UL 94V-0. H 0.5 p ∅d b l TECHNICAL DATA .. Rated voltage UR, VDC Rated voltage UR, VAC Capacitance range, µF 160 100 0.047- 6.8 250 160 0.00068- 4.7 400 220 0.00068- 2.2 630 300 0.00068- 1.2 1000 375 0.00068- 0.0082 p 7.5 10.0 15.0 22.5 27.5 37.5 ± ± ± ± ± ± 0.4 0.4 0.4 0.4 0.4 0.5 d 0.6 0.6 0.8 0.8 0.8 1.0 std I max I 5-1 5-1 6-1 6-1 6-1 6-1 30 30 30 30 30 30 b ± 0.4 ± 0.4 ± 0.4 ± 0.4 ± 0.4 ± 0.7 Capacitance values Capacitance tolerance Category temperature range Rated temperature Voltage derating Climatic category In accordance with IEC E12 series. ±5% standard. Other tolerances on request - 55° C to +105° C +85° C Insulation resistance w e n r o f t o N The rated voltage is decreased with 1.3% / ° C between +85° C and +105° C 55/105/56 n g i s de Measured at 23° C, 100 VDC 60s for UR < 500 VDC and at 500 VDC for UR 500 VDC Between terminals: C ≤ 0.33 µF: ≥ 100 000 MΩ C > 0.33 µF: ≥ 30 000 s Between terminals and case: ≥ 100 000 MΩ Maximum values at 23°C C ≤ 0.1 µF 0.1 µF < C ≤ 1.0 µF 1 k Hz 0.03 % 0.03 % 10 k Hz 0.04 % 0.06 % 100 k Hz 0.15 % - C > 1.0 µF 0.03 % - - Dissipation factor tanδ Inductance Approximately 6 n H/cm for the total length of capacitor winding and the leads. The capacitors can withstand an unlimited number of pulses with a d U/dt according to the article table. For peak to peak voltages lower than the rated voltage (UPP < UR), the specified d U/dt can be multiplied by UR/UPP. Pulse rise time ENVIRONMENTAL TEST DATA Vibration According to IEC 60068-2-6 test Fc. 10- 500 Hz for lead...