Datasheet Details
| Part number | RDM8800 |
|---|---|
| Manufacturer | Unknown Manufacturer |
| File Size | 496.29 KB |
| Description | NFC/RFID Module |
| Datasheet | RDM8800-ETC.pdf |
|
|
Overview: RDM8800 De ITEAD Wiki Contenido 1 Overview 2 Specifications 3 Electrical characteristics 4 Hardware 5 pinmap 6 Data formats 7 Interrupt pin 8 Download 9 Useful Links Overview RDM8800 card reader is a module based on PN532 chip customized for 13.56MHz NFC RFID card, patible with RDM6300 interface, which can read data directly from the serial interface. Unlike ordinary RFID modules, RDM8800 integrates LGT8FF8A chip, patible with Arduino library, thus we can modify the firmware to suit our own needs. Itead Studio also released the source codes of RDM8800 firmware, and users can make secondary development based on it. Specifications PCB size 38.1mm X 17.78mm X 1.6mm Input voltage 5V Interface UART patibility With ISO 14443 Type A protocol With ISO 14443 Type B[1] protocol Baud rate 9600 [1]: Version 1.0 firmware does not support ISO 14443 Type B at present, which requires users to make secondary development. Electrical characteristics Parameter Min. Typical Max. Unit Supply voltage 4.8 5 5.5 VDC Consumption current (average) - 80 - mA Logic input voltage Vss-0.3 3.
| Part number | RDM8800 |
|---|---|
| Manufacturer | Unknown Manufacturer |
| File Size | 496.29 KB |
| Description | NFC/RFID Module |
| Datasheet | RDM8800-ETC.pdf |
|
|
|
P1 Pin1 +5V(DC) Power input P1 Pin2 GND Ground P1 Pin3 NC Unoccupied P1 Pin4 RX(TTL) UART input P1 Pin5 TX(TTL) UART output P2 Pin1 LED Interrupt pin P2 Pin2 +5V(DC) Power output P2 Pin3 GND Ground P3 Pin1 ANT1 Antenna interface P3 Pin2 ANT2 Antenna interface P4 Pin1 SWD SWD debugging interface P4 Pin2 3.3V Power output P4 Pin3 SWC SWD debugging interface P4 Pin4 NC Unoccupied P4 Pin5 RST Reset P4 Pin6 GND Ground Data formats According to V1.0 firmware, there is one type of data output: Directly output a card N.O.
The serial port will output a 10-digit decimal ACSII code card N.O.
directly, which will be followed by a break line "0x0D 0x0A".
| Brand Logo | Part Number | Description | Manufacturer |
|---|---|---|---|
| Itead Studio | RDM8800 | NFC/RFID Module | Itead Studio |
| Part Number | Description |
|---|---|
| RDM630 | RDM630 |