Datasheet4U Logo Datasheet4U.com

SPCA514A - Digital Audio USB Controller

General Description

The chip provides a built-in 8051 CPU with USB interface to handle three types of flash memory: NAND-type, SPI and NextFlash.

It can co-operate with Digital Audio processing chip to manage the flash memory and to communicate with the PC.

2.

Key Features

  • and instruction cycle timing. However, there are some important differences between the micro-controller and the DS80C320.             SPCA514A Serial ports The micro-controller does not implement serial port framing error detection and does not implement slave address comparison for multiprocessor communications. Timer 2 The micro-controller does not implement timer2 down-counting mode or the down-count enable bit(T2MOD, bit0). The timer2 ove.

📥 Download Datasheet

Datasheet Details

Part number SPCA514A
Manufacturer Unknown Manufacturer
File Size 111.62 KB
Description Digital Audio USB Controller
Datasheet download datasheet SPCA514A Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SPCA514A Digital Audio USB Controller 1. General description The chip provides a built-in 8051 CPU with USB interface to handle three types of flash memory: NAND-type, SPI and NextFlash. It can co-operate with Digital Audio processing chip to manage the flash memory and to communicate with the PC. 2. Feature ! ! ! ! ! ! ! ! Build-in 8032 micro-controller and 1K bytes Data RAM Support USB bus with built-in transceiver Four USB pipes supported, including default control pipe, bulk-in pipe, bulk-out pipe and interrupt pipe Support 2M / 4M / 8M x 8 bit NAND-type Flash memory Hardware generated ECC code for flash memory access Support SPI and NextFlash serial interface Support SPCA751 interface 100-pin LQFP           SPCA514A 3.