Datasheet4U Logo Datasheet4U.com

TC3532 - 4.9 - 6 GHz 29dBm MMIC

General Description

The TC3532 is a 2 stage PHEMT MMIC power amplifier.

It is designed for use in low cost, high volume, 4.9~6 GHz band applications.

The MMIC is matched to 50Ω operation.

Key Features

  • P-1 dB: 29 dBm Small Signal Gain: 21 dB Power Added Efficiency: 25 % IP3: 39 dBm Match to 50 Ω operation Bias condition: 400 mA @ 8 V PHOTO.

📥 Download Datasheet

Datasheet Details

Part number TC3532
Manufacturer Unknown Manufacturer
File Size 151.94 KB
Description 4.9 - 6 GHz 29dBm MMIC
Datasheet download datasheet TC3532 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TC35300BP DTMF Receiver Toshiba
TC3500 TIN CAN PRESS-FIT DIODE WON-TOP
TC3500H SURFACE MOUNT THYRISTOR SURGE PROTECTIVE DEVICE Lite-On Technology
TC3500H SURFACE MOUNT THYRISTOR SURGE PROTECTIVE DEVICE Lite-On
TC3501 TIN CAN PRESS-FIT DIODE WON-TOP

Other Datasheets by Unknown Manufacturer

Part Number Description
TC35083F CMOS 10-Bit 2-Ch A/D Converter
TC3582 Two lights Charger
TC303 POWER NAND GATES
TC3097-8 LITE END MULTIPORT REPEATER INTERFACE CONTROLLER
TC3097F-5 LITE END MULTIPORT REPEATER INTERFACE CONTROLLER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TC3532 REV.4_04/12/2004 4.9 - 6 GHz 29dBm MMIC FEATURES • • • • • • P-1 dB: 29 dBm Small Signal Gain: 21 dB Power Added Efficiency: 25 % IP3: 39 dBm Match to 50 Ω operation Bias condition: 400 mA @ 8 V PHOTO ENLARGEMENT DESCRIPTION The TC3532 is a 2 stage PHEMT MMIC power amplifier. It is designed for use in low cost, high volume, 4.9~6 GHz band applications. The MMIC is matched to 50Ω operation. No external matching component is required. It provides a typical gain of 21 dB and P1dB power of more than 29 dBm. Typical bias condition is 8V at 400 mA. The MMIC is packaged in a Ceramic 10 Pins package. The copper based carrier of the package allows direct soldering of the device to the PCB.