TP336 Datasheet | Unknown Manufacturer

Features The thermopile sensor consists of a series of 116 thermoelements, forming a sensitive region size of 545µm (diameter). The sensor is hermetically sealed into a TO-5 metal housing, with an optical filter. This standard filter allows measurements to be made in the spectral range above 5µm wavelength. The thermosensor exhibits an almost white noise, parable to an ohmic resistance. It has a constant signal versus frequency up to its frequency limit, and is directly proportional to incident radiation. .. ▓ Applications - Ear thermometers; clinic thermometers - Infrared thermometers - Consumer applications: hair dryer, micro-wave oven, air conditioner, refrigerator - Continuous temperature control of manufacturing - Security system - Radiation monitor switch system - Absorbing measurement for gas analysis - Thermoelectric converter - Heat flux flowmeter Microelectronics Dept. 1/8 Thermopile Infrared Sensor ▓ Electrical Characteristics Parameter Thermopile Number of thermojunctions .. Condition Min. Typ. Max. Unit ----Interference layer Siliconsubstrate 25 With 5-14µm filter --- 116 1740- 1740 Diameter 545 625 65 85 1.3- 108 16 32 0.36 --- ------µm2 µm Chip size Active region size Thickness of substrate Resistance of thermopile Sensitivity Detecctivity Time constant Noise voltage NEP Temperature range 600 50 70 1.0- 108 --28 0.28 650 80 100 µm KΩ V/W 1.7- 108 cm- Hz1/2/W --36 0.48 100 ms n V/Hz1/2 n W/Hz1/2 Operation -20 Measured at 1 Hz chopper frequency, within spectral range 5-14µm, using a blackbody radiator of 500K temperature. Microelectronics...