UIC4102CP Overview
This device is an extension cable between USB device and host (puter) with embedded into connector “intelligent” integrated circuits on both sides of the cable. The USB cable with the chip inside is not a passive extension cable. The USB signals going in and out of this extension cable in both directions are buffered to assure signal quality.
UIC4102CP Key Features
- pliant with USB 1.1 specification
- Provides support for any full-speed (12 Mb/s) or low-speed (1.5 Mb/s) USB device
- Allows a USB device to have its cable length extended up to 30 meters
- Embedded USB 1.1 Transceivers prevents signal loss
- Low cost in parison with extension of cable using Hubs
- Power (vcc) and ground (gnd) Wire Size: 20 AWG
- USB Signal lines (DP and DM) Wire Size: 28 AWG, Stranded-Twisted Pair, 90 Ohm Characteristic Impedance
- Downstream connector: Female, Type “A”, USB Approved Connector
- Upstream connector: Male, Type “A”, USB Approved Connector
- Ver. 1.1 Preliminary UIC4102CP USB 1.1 Active Extension Cable