ZTA8.0MT Datasheet | Unknown Manufacturer

SPECIFICATION CERAMIC RESONATOR .. MODEL NAME: ZTA8.0MT /ZTT8.0MT SHANDONG YIGUANG ELECTRONIC JOINT STOCK CO., LTD Tel: 86 539 8269397 8269399 Fax: 86 539 8269396 ZTT8.0MT CERAMIC RESONATOR 1. SCOPE This specification is applied to the ceramics resonator used for the clock Oscillation of Microprocessor. MODEL NAME Part Name ZTA8.0MT ZTT8.0MT Customer s Part number Drawing No. 2. 3. DIMENSIONS .. MARK 1 MARK 2 ZTT8.0MT ZTA8.0MT /ZTT8.0MT CERAMIC RESONATOR 4. TEST CIRCUIT Parts shall be measured under a condition (Temp.:3 35 .Hum.:45 85 )unless any Necessity to measure under a standard condition (Temp.:20±2 .Humi.:65±5 ) is occurred. .. X1 ZTA8.0MT C1=C2=30PF IC: TC4069UBP VDD=+5V X2 ZTT8.0MT 5. ELECTRICAL CHARACTERISTICS Item 5-1 5-2 5-3 5-4 5-5 5-6 5-7 Frequency Accuracy Resonant Impedance Operating Temperature Range Storage Temperature Range Stability Temperature Withstanding Voltage Insulation Resistance Aging for 10 Years Requirements 8.0M±0.5% 30 max -20 to +80 -30 to +85 ±0.3% max. DC 100V. 100 M 20 +80 less than 5 sec min DC 10V ±0.5± max ZTA8.0MT/ZTT8.0MT CERAMIC RESONATOR 6.PHYSICAL AND ENVIRONMENTAL CHARCTERISTICS Test Item Lead strength 6-1 Lead Bending Condition of Test Force of 1 Kg is applied for 10 second to each lead in axial direction. Firmed the terminal up to 2mm. Resonator lead shall be subjected to withstand against 90º bending its stem. This operation shall be done toward both direction. The terminals of the Resonator shall be immersion for 3±0.5sec. refer to in a soldering bath 230±5 Mil-STD-202E-208C Resonator shall be measured after being Applied vibration as below. Vibration Freq:10-55Hz Amplitude:1.5mm Directions:3axial directions Requirements No mechanical damage and the measured values shall meet Item5. Solder ability 6-2 .. Vibration 6-3 The solder shall for coat at least 95% of the terminal. The measured values Shall meet table l Time:2bour/each direction Random Drop 6-4...