Datasheet4U Logo Datasheet4U.com

ET9600 - THREE CHANNEL DIFFERENTIAL LINE DRIVER IC

Description

These line drivers are similar to the four channel 26ET31, with the added feature of providing an internal LED drive.

The device is biased so that the base of the LED drive transistor (shown) is held at 2.5V.

To set the LED current, connect a resistor from RSET to ground.

Features

  • Supply Voltage Range 4.5V to 30V Operation to 800KHz CMOS and TTL Compatible Inputs Outputs RS-422A Compatible High Impedance Buffered Inputs with Hysteresis Outputs short circuit protected 70mA peak SINK/SOURCE current Outputs Protected by Thermal Shut-Down.

📥 Download Datasheet

Datasheet preview – ET9600

Datasheet Details

Part number ET9600
Manufacturer ETIC
File Size 60.68 KB
Description THREE CHANNEL DIFFERENTIAL LINE DRIVER IC
Datasheet download datasheet ET9600 Datasheet
Additional preview pages of the ET9600 datasheet.

📁 Similar Datasheet

  • ET9000 - 486 WRITE BACK CACHE AT SINGLE CHIP (ETEQ)
  • ET9235 - Optimum CMOS IC (Etek Microelectronics)
  • ET9260 - Optimum CMOS (Etek Microelectronics)
  • ET9364 - High performance white LED driver (Etek Microelectronics)
  • ET9366 - Constant frequency charge pump DC/DC converter (Etek Microelectronics)
  • ET9378 - Constant frequency 1x/1.33x charge pump DC/DC converter (Etek Microelectronics)
  • ET9501 - Single Lithium-Ion or Lithium-Polymer cell linear battery charger (Etek Microelectronics)
  • ET9510A - Lithium battery mobile power integrated control IC (Etek Microelectronics)
  • ET9510B - Lithium battery mobile power integrated control IC (Etek Microelectronics)
  • ET9518 - 1.5A Rechargeable lithium battery protection circuit (Etek Microelectronics)
Other Datasheets by ETIC
  • ET9560 - 3 CHANNEL DIFFERENTIAL AMPLIFIER-COMPARATOR
  • ET9561 - 3 CHANNEL DIFFERENTIAL AMPLIFIER-COMPARATOR

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com THREE CHANNEL DIFFERENTIAL LINE DRIVER IC With built-in current sink to drive an LED ET9600 FEATURES • • • • • • • • Supply Voltage Range 4.5V to 30V Operation to 800KHz CMOS and TTL Compatible Inputs Outputs RS-422A Compatible High Impedance Buffered Inputs with Hysteresis Outputs short circuit protected 70mA peak SINK/SOURCE current Outputs Protected by Thermal Shut-Down APPLICATIONS • • Optical Encoders Industrial Controls DESCRIPTION These line drivers are similar to the four channel 26ET31, with the added feature of providing an internal LED drive. The device is biased so that the base of the LED drive transistor (shown) is held at 2.5V. To set the LED current, connect a resistor from RSET to ground.
Published: |