GDA14 Datasheet | EUROQUARTZ limited

EURO QUARTZ Frequency range 60MHz to 240MHz LVDS Output Supply Voltage 3.3 VDC Phase jitter 0.2ps typical Pull range from ±30ppm to ±150ppm DESCRIPTION GDA14 VCXOs are packaged in an industry-standard 14 pin dual-inline package. Typical phase jitter for GDA series VCXOs is 0.2 ps. Output is LVDS. Applications include phase lock loop, SONET/ATM, set-top boxes, MPEG , audio/video modulation, video game consoles and HDTV. SPECIFICATION Frequency Range: Supply Voltage: Output Logic: RMS Period Jitter 60.0MHz ~ 120MHz: 120MHz ~ 240MHz: Peak to Peak Jitter 60.0MHz ~ 120MHz: 120MHz ~ 240MHz: Phase Jitter: Initial Frequency Accuracy: Output Voltage HIGH (1): Output Voltage LOW (0): Pulling Range: Control Voltage Range: Temperature Stability: Output Load: GDA14 LVDS VCXO 14 pin DIL VCXO OUTLINE & DIMENSIONS 60.0MHz to 240.0MHz 3.3 VDC ±5% LVDS 2.5ps typical 4.7ps typical 17.5ps typical 24.5ps typical 0.2ps typical Tune to the nominal frequency with Vc= 1.65 ±0.2VDC 1.4 Volts typical 1.1 Volts typical From ±30ppm to ±150ppm 1.65 ±1.35 Volts See table 50 into Vdd or Thevenin equiv. (Terminating resistors required on all outputs) 0.5ns typ., 0.7ns max. 20% Vdd to 80% Vdd 50% ±5% (Measured at Vdd-1.25V) 10ms maximum, 5ms typical 55m A typical, 60m A maximum (for 202.50MHz) 2k V maximum -55° to +150°C ±2ppm per year maximum See table Fully pliant or non-pliant PART NUMBERING Example: 3GDA14G-B-80N-60.000 Rise/Fall Times: Duty Cycle: Start-up Time: Current Consumption: Static Discharge Protection: Storage Temperature: Ageing: Enable/Disable: Ro HS Status: FREQUENCY STABILITY Supply Voltage 3 = +3.3V Series Designator GDA14 Ro HS Status G = Ro Hs pliant Blank = Ro HS non-pliant Stability over temperature range (See table) Pullability in ±ppm Pullability determinator N = minimum M = maximum T = Typical Frequency in MHz Stability Code Stability ±ppm Temp. Range A 25 0°~+70°C B 50 0°~+70°C C 100 0°~+70°C D 25 -40°~+85°C E 50 -40°~+85°C F 100 -40°~+85°C If non-standard...