MB42T Datasheet | EUROQUARTZ limited

EURO QUARTZ 11.4 x 9.6 x 2.5mm 4 pad SMD HCMOS Quick turnaround production Low Jitter: 70ps peak to peak (typical) Low phase noise: -114d Bc at1k Hz offset (133MHz) Custom frequencies are easily configured Supply voltages 2.8V, 3.0V or 3.3VDC TCXO or VCTCXOs CMOS square wave output MB42T TCXO - OUTLINES AND DIMENSIONS DESCRIPTION The MB42T TCXO is packaged in 7 x 5mm, 4 pad ceramic SMD package. The part has a squarewave (CMOS) output and a tight stability over temperature. The part may be specified as a TCXO or a Voltage-Controlled TCXO (VCTCXO). A 0.01m F decoupling capacitor is built-in. SPECIFICATION Product Series Code TCXO: VCTCXO: Frequency Range: Output Waveform: Initial Calibration Tolerance: Frequency Stability vs. Temperature Change: vs. Ageing: vs. Voltage Change: vs. Load Change: vs. Reflow (SMD type): Supply Voltage: MB42T VMB42T 1.0MHz to 200.0MHz Squarewave, HCMOS <±2.0ppm at +25°±2°C Output Logic Levels: Rise and Fall Times: Duty Cycle: Start-up Time: Current Consumption at 25.0MHz: at 200.0MHz: Output Load: Storage Temperature: Ro HS Status: PD F w C ±0.5 P ±1.0 P P P P P ±1.5 P P P P P ±2.0 P P P P P 0 ~ +50 -10 ~ +60 ASK x x x -20 ~ +70 -30 ~ +75 -40 ~ +85 Offset 10Hz (d Bc/Hz) -76 100Hz -102 1k Hz -114 r e .n a ww ±2.5 P P P P P 10k Hz -110 8m A max. 20m A max. 15p F -55~+125°C Ro HS pliant and p B free FREQUENCY STABILITY OVER TEMPERATURE Frequency Stability (ppm) ua ±3.0 P P P PP P 100k Hz -100 See table ±1.0 ppm max. first year ±0.3 ppm max. ±5% change ±0.3 ppm max. ±10% change ±1.0ppm max. for one reflow (Measured after 24 hours) +2.8VDC ±5% +3.0VDC ±5% +3.3VDC ±5% Logic High: 90% Vdd min. Logic Low: 10% Vdd max. 10ns max. 50±10% standard, 50±5% option 5ms typical, 10ms max. t e n VMB42T VOLTAGE CONTROL SPECIFICATION Control Voltage Centre: Standard = +1.5±1.0Volts (for all voltages) Frequency Deviation: ±5.0ppm min. (Vcon = +1.5V±1.0V) Slope Polarity: Positive (increase of control voltage increases output frequency.) Input...