GW42 Datasheet | EUROQUARTZ

.Data Sheet.co.kr EURO QUARTZ Frequency range 50.01MHz to 800MHz LVCMOS Output Supply Voltage 3.3 VDC High Q fundamental mode crystal Low jitter multiplier circuit DESCRIPTION GW42 VCXOs, are packaged in an industry-standard, 4 pad, 11.4mm x 9.6mm x 2.5mm SMD package. GW42 VCXOs incorporate a high Q fundamental crystal and a low jitter multiplier circuit. SPECIFICATION Frequency Range: Supply Voltage: Output Logic: Integrated Phase Jitter: Period Jitter RMS: Period Jitter Peak to peak: Phase Noise: Initial Frequency Accuracy: Output Voltage HIGH (1): Output Voltage LOW (0): Pulling Range: Temperature Stability: Output Load: Start-up Time: Duty Cycle: Rise/Fall Times: Current Consumption <96MHz: >96MHz: Linearity: Modulation Bandwidth: Input Impedance: Slope Polarity: (Transfer function) GW42 CMOS VCXO 11.4 x 9.6 x 2.5mm 4 pad SMD OUTLINE & DIMENSIONS 50.01MHz to 800.0MHz 3.3 VDC ±5% LVCMOS 2.6ps typical, 4.0ps maximum (for 155.250MHz) 4.3ps typical (for 155.250MHz) 27.0ps typical (for 155.250MHz) See table below Tune to the nominal frequency with Vc= 1.65 ±0.2VDC 90% Vdd minimum 10% Vdd maximum From ±30ppm to ±150ppm See table 15p F 10ms maximum, 5ms typical 50% ±5% measured at 50% Vdd 1.2ns typical (15p F load) 30m A maximum (15p F load) 40m A maximum (15p F load) 10% maximum, 6% typical 25k Hz minimum 2 MW minimum Monotonic and Positive. (An increase of control voltage always increases output frequency.) -50° to +100°C ±5ppm per year maximum Not available (4 pad package) Fully pliant Storage Temperature: Ageing: Enable/Disable (Tristate): Ro HS Status: PHASE NOISE Offset 10Hz 100Hz 1k Hz 10k Hz 100k Hz 1MHz 10MHz Frequency 155.25MHz -65d Bc/Hz -95d Bc/Hz -120d Bc/Hz -125d Bc/Hz -121d Bc/Hz -120d Bc/Hz -140d Bc/Hz FREQUENCY STABILITY Stability Code Stability ±ppm Temp. Range A 25 0°~+70°C B 50 0°~+70°C C 100 0°~+70°C D 25 -40°~+85°C E 50 -40°~+85°C F 100 -40°~+85°C If non-standard frequency stability is required Use ‘I’ followed by stability, i.e. I20 for ±20ppm PART...