EA5070FA16-22.5792M Datasheet | Ecliptek

EA5070 F A 16 -22.5792M Series Quartz Crystal Resonator 5.0mm x 7.0mm x 1.3mm 4 Pad Ceramic Surface Mount (SMD) Frequency Tolerance/Stability ±30ppm at 25°C, ±50ppm over -40°C to +85°C Mode of Operation AT-Cut Fundamental Nominal Frequency 22.5792MHz Load Capacitance 16p F Parallel Resonant ELECTRICAL SPECIFICATIONS Nominal Frequency Frequency Tolerance/Stability Aging at 25°C Load Capacitance Shunt Capacitance Equivalent Series Resistance Mode of Operation Drive Level Spurious Response Storage Temperature Range Insulation Resistance 22.5792MHz ±30ppm at 25°C, ±50ppm over -40°C to +85°C ±3ppm/year Maximum 16p F Parallel Resonant 7p F Maximum 30 Ohms Maximum AT-Cut Fundamental 50µWatts Maximum -3d B Minimum (Measured from Fo to Fo +5000ppm) -40°C to +85°C 500 Megaohms Minimum (Measured at 100Vdc) ENVIRONMENTAL & MECHANICAL SPECIFICATIONS ESD Susceptibility Fine Leak Test Flammability Gross Leak Test Mechanical Shock Moisture Resistance Moisture Sensitivity Resistance to Soldering Heat Resistance to Solvents Solderability Temperature Cycling Vibration MIL-STD-883, Method 3015, Class 1, HBM: 1500V MIL-STD-883, Method 1014, Condition A UL94-V0 MIL-STD-883, Method 1014, Condition C MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 1004 J-STD-020, MSL 1 MIL-STD-202, Method 210, Condition K MIL-STD-202, Method 215 MIL-STD-883, Method 2003 MIL-STD-883, Method 1010, Condition B MIL-STD-883, Method 2007, Condition A .ecliptek. | Specification Subject to Change Without Notice | Revision A 12/19/2012 | Page 1 of 4 MECHANICAL DIMENSIONS (all dimensions in millimeters) PIN CONNECTION Crystal Cover/Ground Crystal Cover/Ground 5.00 ±0.15 MARKING ORIENTATION 2.54 ±0.20 1.2 ±0.1 (x4) 4 1 4.6 ±0.2 3 1.3 MAX 2 1 2 3 4 LINE MARKING 1 2 E22.57 E=Ecliptek Designator XXXXX XXXXX=Ecliptek Manufacturing Identifier 7.00 ±0.15 1.0 ±0.2 (x4) Note: Chamfer and index mark not shown. Suggested Solder Pad Layout All Dimensions in...