EV32C6A5A1-8.192M Datasheet | Ecliptek

Series Ro HS pliant (Pb-free) 3.3V 6 Pad 5mm x 7mm Ceramic SMD HCMOS VCXO (Tri-State Pad 2) Operating Temperature Range 0°C to +70°C Absolute Pull Range ±100ppm Minimum Ro HS Pb Nominal Frequency 8.192MHz EV32C6 A 5 A 1 -8.192M Duty Cycle 50 ±5(%) Typical, 50 ±10(%) Maximum Linearity 10% Typical, 20% Maximum ELECTRICAL SPECIFICATIONS Nominal Frequency Frequency Tolerance/Stability Aging at 40°C .. Operating Temperature Range Supply Voltage Input Current Output Voltage Logic High (Voh) Output Voltage Logic Low (Vol) Rise/Fall Time Duty Cycle Load Drive Capability Output Logic Type Absolute Pull Range 8.192MHz ±50ppm Maximum (Inclusive of all conditions: Calibration Tolerance at 25°C, Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, Shock, and Vibration.) ±2ppm/first year Typical, ±10ppm/10 years Maximum 0°C to +70°C 3.3Vdc ±10% 15m A Maximum 90% of Vdd Minimum (IOH = -4m A) 10% of Vdd Minimum (IOL = +4m A) 5n Sec Maximum (Measured at 20% to 80% of Waveform) 50 ±5(%) Typical, 50 ±10(%) Maximum (Measured at 50% of Waveform) 10TTL Load or 30p F HCMOS Load Maximum HCMOS ±100ppm Minimum (Inclusive of all conditions: Calibration Tolerance at 25°C, Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, Shock, Vibration, and Aging over the Control Voltage (Vc).) 0.3Vdc to 3.0Vdc (Test Condition for Absolute Pull Range) 0.0Vdc to Vdd 10% Typical, 20% Maximum Positive Tranfer Characteristic 10k Hz Minimum (Measured at -3d B, Vc = 1.65Vdc) 50k Ohms Minimum 10µA Maximum -70d Bc/Hz at offset of 10Hz, -100d Bc/Hz at offset of 100Hz, -130d Bc/Hz at offset of 1k Hz, -147d Bc/Hz at offset of 10k Hz, -152d Bc/Hz at offset of 100k Hz, and -155d Bc/Hz at offset of 1MHz (Typical values at Fo = 27MHz) +0.9Vdd Minimum to Enable Output; +0.1Vdd Maximum to Disable Output (High Impedance); No Connect to Enable Output. 1p Sec Maximum (Fj = 12k Hz to 20MHz) 10m Sec Maximum -55°C to +125°C Control...