EL5144C Datasheet | Elantec Semiconductor

EL5144C, EL5146C, EL5244C, EL5246C, EL5444C EL5144C, EL5146C, EL5244C, EL5246C, EL5444C 100 MHz Single Supply Rail to Rail Amplifier Features - Rail to Rail Output Swing General Description The EL5144C series amplifiers are voltage feedback, high speed, rail to rail amplifiers designed to operate on a single +5V supply. They offer unity gain stability with an unloaded - 3d B bandwidth of 100 MHz. The input mon mode voltage range extends from the negative rail to within 1.5V of the positive rail. Driving a 75Ω double terminated coaxial cable, the EL5144C series amplifiers drive to within 150 m V of either rail. The 200 V/µsec slew rate and 0.1% / 0.1° differential gain / differential phase makes these parts ideal for posite and ponent video applications. With its voltage feedback architecture, this amplifier can accept reactive feedback networks, allowing them to be used in analog filtering applications These amplifiers will source 90 m A and sink 65 m A. The EL5146C and EL5246C have a power-savings disable feature. Applying a standard TTL low logic level to the CE (Chip Enable) pin reduces the supply current to 2.6 µA within 10 nsec. Turn on time is 500 nsec, allowing true break-before-make conditions for multiplexing applications. Allowing the CE pin to float or applying a high logic level will enable the amplifier. For applications where board space is critical, singles are offered in a SOT23-5 package, duals in MSOP-8 and MSOP-10 packages, and quads in a QSOP-16 package. Singles, duals and quads are also available in industry standard pinouts in SOIC and PDIP packages. All parts operate over the industrial temperature range of -40°C to +85°C. 5V 0V -3 d B Bandwidth = 100 MHz Single Supply +5V operation Power Down to 2.6 µA Large Input mon Mode Range 0V < VCM < 3.5 V - Diff Gain/Phase = 0.1%/0.1° - Low Power 35m W per amplifier - Space Saving SOT23-5, MSOP8&10, & QSOP-16 packaging - - - - Applications - - - - - - - - Video Amplifier 5 Volt Analog...