EL5193C Datasheet | Elantec Semiconductor

Features - 300MHz -3d B bandwidth - 4m A supply current - Single and dual supply operation, from 5V to 10V supply span - Available in 5-pin SOT23 package - Dual (EL5293C) and triple (EL5393C) available - High speed, 1GHz product available (EL5193C) - High speed, 6m A, 600MHz product available (EL5192C, EL5292C, and EL5392C General Description The EL5193C is a current feedback amplifier with a bandwidth of 300MHz. This makes these amplifiers ideal for today’s high speed video and monitor applications. With a supply current of just 4m A and the ability to run from a single supply voltage from 5V to 10V, these amplifiers are also ideal for hand held, portable or battery-powered equipment. For applications where board space is critical, the EL5193C is offered in the 5-pin SOT23 package, as well as an industry standard 8-pin SO. The EL5193C operates over the industrial temperature range of -40°C to +85°C. Applications - - - - - - - - Battery Powered Equipment Hand Held, Portable Devices Video Amplifiers Cable Drivers RGB Amplifiers Test Equipment Instrumentation Current to Voltage Converters Pin Configurations SO8 5-Pin SOT23 NC 1 OUT 1 5 VS+ IN- 2 VS- 2 + IN+ 3 + 7 VS+ 6 OUT 5 NC EL5193CS 8 NC- Ordering Information Part No EL5193CW-T7 EL5193CW-T13 EL5193CS EL5193CS-T7 EL5193CS-T13 Package 5-Pin SOT23 5-Pin SOT23 8-Pin SO 8-Pin SO 8-Pin SO Tape & Reel 7” 13” 7” 13” Outline # MDP0038 MDP0038 MDP0027 MDP0027 MDP0027 IN+ 3 EL5193CW 4 INVS- 4 - This pin must be left disconnected April 12, 2001 Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these specifications are maintained at the factory and are available upon your request. We remend checking the revision level before finalization of your design documentation. © 2001 Elantec Semiconductor, Inc. Single 300MHz Current...