EL5197C Datasheet | Elantec Semiconductor

Features - - - - Gain selectable (+1, -1, +2) 200MHz -3d B BW (AV = 1, 2) 4m A supply current Single and dual supply operation, from 5V to 10V - Available in 5-pin SOT23 package - Triple (EL5397C) available - 400MHz, 9m A product available (EL5196C, EL5396C) General Description The EL5197C is a fixed gain amplifier with a bandwidth of 200MHz, making these amplifiers ideal for today’s high speed video and monitor applications. The EL5197C features internal gain setting resistors and can be configured in a gain of +1, -1 or +2. The same bandwidth is seen in both gain-of-1 and gain-of-2 applications. With a supply current of just 4m A and the ability to run from a single supply voltage from 5V to 10V, these amplifiers are also ideal for hand held, portable or battery powered equipment. For applications where board space is critical, the EL5197C is offered in the 5-pin SOT23 package, as well as an 8-pin SO. The EL5197C operates over the industrial temperature range of -40°C to +85°C. Applications - - - - - - - - Battery Powered Equipment Hand Held, Portable Devices Video Amplifier Cable Drivers RGB Amplifier Test Equipment Instrumentation Current to Voltage Converters Ordering Information Part No EL5197CW-T7 EL5197CW-T13 EL5197CS EL5197CS-T7 EL5197CS-T13 Package 5-Pin SOT23 5-Pin SOT23 8-Pin SO 8-Pin SO 8-Pin SO Tape & Reel 7” 13” 7” 13” Outline # MDP0038 MDP0038 MDP0027 MDP0027 MDP0027 Pin Configurations 8-Pin SO 5-Pin SOT23 OUT 1 VS- 2 IN+ 3 EL5197CW + 4 IN5 VS+ NC 1 IN- 2 IN+ 3 VS- 4 EL5197CS + 8 NC- 7 VS+ 6 OUT September 19, 2001 5 NC - This pin must be left disconnected Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these specifications are maintained at the factory and are available upon your request. We remend checking the revision level before finalization of your design...