EL5283C Datasheet | Elantec Semiconductor

Features - - - - - - - - 8ns typ. propagation delay 5V to 12V input supply +2.7V to +5V output supply True-to-ground input Rail-to-rail outputs Active low latch Single available (EL5181C) Quad available (EL5481C & EL5482C) - Pin-patible 4ns family available (EL5x85C, EL5287C & EL5486C) General Description The EL5283C parator is designed for operation in single supply and dual supply applications with 5V to 12V between VS+ and VS-. For single supplies, the inputs can operate from 0.1V below ground for use in ground-sensing applications. The output side of the parators can be supplied from a single supply of 2.7V to 5V. The rail-to-rail output swing enables direct connection of the parator to both CMOS and TTL logic circuits. The latch input of the EL5283C can be used to hold the parator output value by applying a low logic level to the pin. The EL5283C contains two parators set up as a window parator. A single input is pared with a high and low reference. When the output goes beyond one of these reference signals, the relevant output goes high. The EL5283C in the 10-pin MSOP package and is specified for operation over the full -40°C to +85°C temperature range. Also available are a single (EL5181C) and quad versions (EL5481C and EL5482C). Applications - - - - - - Threshold detection High speed sampling circuits High speed triggers Line receivers PWM circuits High speed V/F converters Ordering Information Part No. EL5283CY EL5283CY-T13 Package 10-Pin MSOP 10-Pin MSOP Tape & Reel 13” Outline # MDP0043 MDP0043 Pin Configurations VS+ 1 VREFH 2 IN 3 VREFL 4 VS- 5 EL5283C (10-Pin MSOP) + + - 10 VSD 9 OUTH 8 LATCH 7 OUTL 6 GND September 6, 2001 Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these specifications are maintained at the factory and are available upon your request. We remend...