EL5392C Datasheet | Elantec Semiconductor

Features - 600MHz -3d B bandwidth - 6m A supply current (per amplifier) - Single and dual supply operation, from 5V to 10V - Available in 16-pin QSOP package - Single (EL5192C) and Dual (EL5292C) available - High speed, 1GHz product available (EL5191C) - Low power, 4m A, 300MHz product available (EL5193C, EL5293C, and EL5393C General Description The EL5392C is a triple current feedback amplifier with a very high bandwidth of 600MHz. This makes this amplifier ideal for today’s high speed video and monitor applications. With a supply current of just 6m A per amplifier and the ability to run from a single supply voltage from 5V to 10V, the EL5392C is also ideal for hand held, portable or battery powered equipment. For applications where board space is critical, the EL5392C is offered in the 16-pin QSOP package, as well as an industry standard 16-pin SO. The EL5392C operates over the industrial temperature range of 40°C to +85°C. Applications - - - - - - Video Amplifiers Cable Drivers RGB Amplifiers Test Equipment Instrumentation Current to Voltage Converters Pin Configurations 16-Pin SO & QSOP INA+ NC- 1 2 3 4 5 6 7 8 + + + 16 INA15 OUTA 14 VS+ 13 OUTB 12 INB11 NC 10 OUTC 9 INC- Ordering Information Part No EL5392CS EL5392CS-T7 EL5392CS-T13 EL5392CU EL5392CU-T13 Package 16-Pin SO 16-Pin SO 16-Pin SO 16-Pin QSOP 16-Pin QSOP Tape & Reel 7” 13” 13” Outline # MDP0027 MDP0027 MDP0027 MDP0040 MDP0040 VSNC- INB+ NC NC- INC+ EL5392CS, EL5392CU April 26, 2001 Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these specifications are maintained at the factory and are available upon your request. We remend checking the revision level before finalization of your design documentation. © 2001 Elantec Semiconductor, Inc. Triple 600MHz Current Feedback Amplifier Absolute Maximum...