EL5396C Datasheet | Elantec Semiconductor

- Preliminary - Preliminary Triple 400MHz Fixed Gain Amplifier Features - Gain selectable (+1, -1, +2) - 400MHz -3d B Bandwidth (AV = 1, 2) - 9m A supply current (per amplifier) - Single and dual supply operation, from 5V to 10V - Power-down - Available in 16-pin QSOP package - Single (EL5196C) available - 200MHz, 3m A product available (EL5197C, EL5397C) General Description The EL5396C is a triple channel, fixed gain amplifier with a bandwidth of 400MHz, making these amplifiers ideal for today’s high speed video and monitor applications. The EL5396C Features internal gain setting resistors and can be configured in a gain of +1, -1 or +2. The same bandwidth is seen in both gain-of-1 and gain-of-2 applications. The EL5396C can be run from a single or dual supply voltage of 5V to 10V and consumes just 9m A of supply current per channel. Each channel of the EL5396C has a disable. Upon being disabled, the outputs are tri-stated and the power supply current reduces to less than 150µA per amplifier. Allowing the CE pin to float, or applying a low logic level will enable the amplifier. For applications where board space is critical, the EL5396C is offered in the 16-pin QSOP package, as well as a 16-pin SO. The EL5396C is specified for operation over the full industrial temperature range of ---40°C to +85°C. Applications - - - - - - Video Amplifiers Cable Drivers RGB Amplifiers Test Equipment Instrumentation Current to Voltage Converters Pin Configurations Ordering Information Part No EL5396CS EL5396CS-T7 EL5396CS-T13 EL5396CU EL5396CU-T13 Package 16-Pin SO 16-Pin SO 16-Pin SO 16-Pin QSOP 16-Pin QSOP Tape & Reel 7” 13” 13” Outline # MDP0027 MDP0027 MDP0027 MDP0040 MDP0040 16-Pin SO & QSOP INA+ 1 CEA 2 VS- 3 CEB 4 INB+ 5 NC 6 CEC 7 INC+ 8 EL5396CS, EL5396CU + + + 16 INA15 OUTA 14 VS+ 13 OUTB 12 INB11 NC September 19, 2001 10 OUTC 9 INC- Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of...