ELH0041G Datasheet | Elantec Semiconductor

Features High output current 200 m A Excellent open-loop gain 106 d B Low offset voltage 1 m V Wide full power bandwidth 20 k Hz High slew rate 3 V ms MIL-STD-883 devices 100% manufactured in U S A General Description The ELH0041 are general purpose operational amplifiers capable of delivering large output currents not usually associated with conventional IC op amps the ELH0041 delivers currents of 200 m A at voltage levels closely approaching the available power supplies In addition both the inputs and outputs are protected against overload These devices are pensated with a single external capacitor and are free of any unusual oscillation or latch-up problems For applications requiring output currents in excess of 1A see the ELH0021 data sheet The excellent input characteristics and high output capability of the ELH0041 make it an ideal choice for power applications such as DC servos capstan drivers deflection yoke drivers and programmable power supplies The ELH0041 is particularly suited for applications such as torque drivers for inertial guidance systems diddle yoke drivers for alphanumeric CRT displays cable drivers and programmable power supplies for automatic test equipment Elantec facilities ply with MIL-I-45208A and other applicable quality specifications Elantec’s Military devices are 100% fabricated and assembled in our rigidly controlled ultra-clean facilities in Milpitas California For additional information on Elantec’s Quality and Reliability Assurance policy and procedures request brochure QRA-1 Ordering Information Part No Temp Range Pkg Outline ELH0041G 883B b 55 C to a 125 C TO-8 MDP002 8508701ZX is the SMD version of this device Connection Diagram - 1 Top View Burn-In Circuit Equivalent Schematic September 1992 Rev G - 2 0041 - 3 Note All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication however this data sheet cannot be a ‘‘controlled...