EL1504C Datasheet | Elantec

EL1504C, EL1505C - Product Brief EL1504C, EL1505C - Product Brief Differential Line Driver Features - plete ADSL differential driver - 45VP-P differential output drive into 200Ω - -60d Bc typical output distortion at full output at 2MHz - Drives 8 single-ended video loads, or 4 S-VHS loads, or 4 differential video loads - Power surface-mount package General Description The EL1504/5C contains two wideband high-voltage drivers. It is designed to drive 45VP-P signals at 2MHz into a 200Ω load differentially with very low distortion. Both amplifiers are of the current-feedback type, giving high slew rates while consuming moderate power. They retain frequency response over a wide range of externally set gains. The EL1504/5C operate on ±5V to ±15V supplies, and maintain their bandwidths and linearities over the supply range. The EL1504C, in a 20-Pin Fused Lead SOIC package, has eight center pins which are used as ground connections and heat spreaders. This facilitates the use of external heatsinking to increase the power handling of the device. The EL1505C, in a 16-Pin SOIC package, is designed for applications which do not require full power and where a smaller PCB footprint is desirable. The packages are specified for operation over the full -40°C to +85°C temperature range. Outline # MDP0027 MDP0027 Applications - - - - ADSL line interface HDSL line driver Video distribution amplifier Video twisted-pair line driver Ordering Information Part No EL1504CM EL1505CM Package 20-Pin SOL 16-Pin SOL Tape & Reel Connection Diagram RL RG 1 OUTA VS3.3µF Tantalum RF 2 3 4 5 6 7 INA+ 8 NC NC 9 10 + + 19 18 17 16 15 14 13 12 NC 11 NC 20 RL RG RF OUTB VS+ 3.3µF Tantalum INB+ March 8, 1999 Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these specifications are maintained at the factory and...