EL2160C Datasheet | Elantec

180MHz Current Feedback Amplifier Features - - - - - - - - - - 130MHz 3d B bandwidth (AV=+2) 180MHz 3d B bandwidth (AV=+1) 0.01% differential gain, RL=500Ω 0.01° differential phase, RL=500Ω Low supply current, 8.5m A Wide supply range, ±2V to ±15V 80m A output current (peak) Low cost 1500V/µs slew rate Input mon mode range to within 1.5V of supplies - 35ns settling time to 0.1% General Description The EL2160C is a current feedback operational amplifier with -3d B bandwidth of 130MHz at a gain of +2. Built using the Elantec proprietary monolithic plementary bipolar process, this amplifier uses current mode feedback to achieve more bandwidth at a given gain than a conventional voltage feedback operational amplifier. The EL2160C is designed to drive a double terminated 75 Ω coax cable to video levels. Differential gain and phase are excellent when driving both loads of 500Ω (<0.01%/<0.01°) and double terminated 75Ω cables (0.025%/0.1°). The amplifier can operate on any supply voltage from 4V (±2V) to 33V (±16.5V), yet consume only 8.5m A at any supply voltage. Using industry-standard pinouts, the EL2160C is available in 8-pin PDIP and SO packages, as well as a 16-pin SO (0.300”) package. All are specified for operation over the full -40°C to +85°C temperature range. For dual and quad applications, please see the EL2260C/EL2460C datasheet. Applications - - - - - Video amplifiers Cable drivers RGB amplifiers Test equipment amplifiers Current to voltage converters Connection Diagrams Ordering Information Part No. EL2160CN EL2160CS-T7 EL2160CS-T13 EL2160CM Package 8-Pin PDIP 8-Pin SO 8-Pin SO 16-Pin SO (0.300”) Tape & Reel 7” 13” 13” Outline# MDP0031 MDP0027 MDP0027 MDP0027 MDP0027 NC 1 NC 2 -IN 3 NC 4 +IN 5 NC 6 VS- 7 NC 8 16-Pin SO (0.300”) + 16 NC 15 NC 14 VS+ 13 NC 12 OUT 11 NC 10 NC 9 NC NC 1 -IN 2 +IN 3 VS- 4 8-Pin PDIP/SO 8 NC 7 VS+ EL2160CM-T13 16-Pin SO (0.300”) + September 26, 2001 6 OUT 5 NC Note: All information contained in this...