SY4-1A476M-RC Datasheet | Elna

Specifications, . SKY SYL Dimension table Resin mold chip type capacitors .. GREEN CAP SMD TANTALUM CHIP CAPACITORS (CHIPCON) ® Standard Type Specifications Item Performance 55 to 125 (Above 85˚C use category voltage) Refer to standard ratings table p10%(Except SY9) , p20% Refer to standard ratings table Refer to standard ratings table Test conditions: Soaking at 260˚C for 5 seconds (120Hz) (120Hz) (100k Hz) Category temperature range (˚C) Leakage current (µA) Tolerance at rated capacitance (%) Tangent of loss angle ESR Resistance to soldering heat Leakage current Percentage of capacitance change Tangent of loss angle Percentage of capacitance change Tangent of loss angle Leakage current Percentage of capacitance change Tangent of loss angle Leakage current data have been measured at derated voltage- SY5,SY6,SY7,SY8,SY9,SYL The initial specified value or less Within p10% of initial value 150% or less of the initial specified value Within 10 to 0% of the initial value Refer to standard rating table 1000% or less of the initial specified value Within 0 to 10% of the initial value Refer to standard rating table SY1,SY2,SY3,SY4 The initial specified value or less Within p5% of initial value The initial specified value or less Within 10 to 0% of the initial value Refer to standard rating table 1000% or less of the initial specified value Within 0 to 10% of the initial value Refer to standard rating table 55˚C Characteristics at high and low temperature 85˚C 125˚C Leakage current Percentage of capacitance change Tangent of loss angle Test conditions: Left at 40˚C under 90 to 95% RH for 500 hours 1250% or less of the initial specified value Within 0 to 12% of the initial value Refer to standard rating table 1250% or less of the initial specified value Within 0 to 12% of the initial value Refer to standard rating table Damp heat, steady state (Humidity) Leakage current Percentage of capacitance change Tangent of loss angle Test...