EBS25UC8APFA Datasheet | Elpida Memory

DATA SHEET 256MB Unbuffered SDRAM DIMM EBS25UC8APFA (32M words × 64 bits, 1 bank) Description The EBS25UC8APFA is 32M words × 64 bits, 1 bank Synchronous Dynamic RAM Registered Module, mounted 8 pieces of 256M bits SDRAM sealed in TSOP package. This module provides high density and large quantities of memory in a small space without utilizing the surface mounting technology. Decoupling capacitors are mounted on power supply line for noise reduction. Features - Fully patible with 8 bytes DIMM: JEDEC standard outline - 168-pin socket type dual in line memory module (DIMM)  PCB height: 34.93mm (1.38inch )  Lead pitch: 1.27mm - 3.3V power supply - Clock frequency: 133MHz (max.) - LVTTL interface - Data bus width: × 64 non-ECC - Single pulsed /RAS - 4 Banks can operates simultaneously and independently - Burst read/write operation and burst read/single write operation capability - Programmable burst length (BL): 1, 2, 4, 8 - 2 variations of burst sequence  Sequential  Interleave - Programmable /CAS latency (CL): 2, 3 - Byte control by DQMB - Refresh cycles: 8192 refresh cycles/64ms - 2 variations of refresh  Auto refresh  Self refresh Document No. E0210E20 (Ver. 2.0) Date Published June 2002 (K) Japan URL: http://.elpida. Elpida Memory, Inc. 2001-2002 Ordering Information Part number EBS25UC8APFA-7A EBS25UC8APFA-75 - Clock frequency MHz (max.) 133 133 /CAS latency Package 2, 3 3 168-pin DIMM Contact pad Gold Mounted devices EDS2508APTA Note: 100MHz operation at /CAS latency = 2. Pin Configurations 1 pin 10 pin 11 pin 40 pin 41 pin 84...