AIF25H300-NTL Datasheet | Emerson

Features - 600W Continuous power at 100°C baseplate temperature - 108W/in3 (6.6W/cm3) - High efficiency - up to 90% - Low output ripple and noise - Positive and Negative enable function - Excellent transient response - OVP, OCP, V Adj control with ALPTM analog mode linear control, or through I2C bus with digital mode control. - Paralleable with accurate current sharing - EU Directive 2002/95/EC pliant for Ro HS Input range Input surge Efficiency - 420 VDC 450V / 100ms 90%@5.0V (Typical) 0.2% typical down to no load 0.2% typical 100m V typical (below 5V); 2% typical (5V and above) Up to 0.5V +/-20% for 5V and above; +10%/ -50% for below 5V 5% max for 3.3V and above, 150m V for 1.8V, deviation with 25% to 75% full load 250 μS (max) recovery 3% typical 115% Vo (nominal) 115% Io maximum Output Load Regulation Line Regulation Noise / Ripple Remote sense Output voltage adjust range Transient Response Current Share Accuracy Overvoltage Protection Current Limit Control Voltage Adjust 80 to 120% Vo linear programming for 12V, 15V, 24V, 48V 50% to 110% for 1.8V - 5.0V Enable TTL patible (positive & negative enable options) Current Limit Adjust 20 to 100% Io linear programming or digital mode control Clock Input (external sync) 3.3 to 5.5Vp-p @ 800KHz ±10% Clock Output (internal clock) 4.5Vp-p typical@ 800KHz ±5% Power Good Identification High (Vo) = power good Temperature Monitor Output 10m V/°K (2.73 = 0°C) Current Monitor Output 0 to 1m A (1m A = 100% Io rated) Over Voltage Protection Adjust 110 to 150% Vo linear programming by voltage or resistor, or digital mode control Safety UL c UL TUV CE 60950 Recognized 60950 Recognized EN60950 Licensed CE Mark Notes Nominal values apply with sense pins connected and other control pin unconnected. ALP: Astec Linear Programming Embedded Power for Business-Critical Continuity Environmental Specifications Operating temperature Start up temperature Storage temperature Overtemperature protection Ordering Information Americas 5810...