BXA40-48S2V9-MJ Datasheet | Emerson

Features - Pin-patible with NFC40 Series - Meets tele power supply interface standard ETS300-132-2 - EN60950, CSA C22.2 No. 950 and UL1950 safety approvals - EN61000-4-2, -3, -4, -5, -6 immunity pliant - Fixed frequency operation at 350 k Hz typ. - MTBF in excess of 500,000 hours - Basic insulation system with 1500 Vdc isolation - Remote sense on low voltage logic outputs - Output voltage trim - Available Ro HS pliant - 2 year warranty The BXA40 Series providing up to 40 Watts, has been conceived as an applications specific range of dc-dc converters, specifically addressing telemunications, industrial electronics, test equipment, mobile telemunications and distributed power applications. The series offers two wide input voltage ranges, 18 Vdc to 36 Vdc and 36 Vdc to 75 Vdc, and is available with single outputs from 2.9 V to 12 V. The BXA40 series is designed to meet ETSI teles interface standards ETS300-132-2. Together with internal filtering, safety approval to IEC950 and basic insulation, the 48 V models are ideal for telemunications applications. The 24 V models are particularly suited to industrial and test equipment applications, featuring EN61000-4-2, -3, -4, -5 and -6 immunity pliance. Other features include low output ripple, overvoltage protection, indefinite short circuit protection, remote enable and remote sense. Safety VDE0805/EN60950/IEC950 File No. 14501-3336-7009 Licence No. 6296 UL1950 File No. E174104 CSA C22.2 No. 950 File No. LR41062C Embedded Power for Business-Critical Continuity Specifications All specifications are typical at nominal input, full load at 25°C unless otherwise stated. Rev.03.08.07 bxa40s 2 of 4 OUTPUT SPECIFICATIONS Voltage adjustability Line regulation Load regulation Ripple and noise (20 MHz bandwidth) Low line to high line Full load to no load 2.9 V and 3.3 V 5V 12 V All models ±10% ±0.3% ±1.0% 30 m V pk-pk 50 m V pk-pk 100 m V pk-pk 20 m V rms ±0.02%/°C (See Note 9) (See Note 10) 25% to 100% load (See Note 11) 135% Vout...