BXB150-48S12FLTY Datasheet | Emerson

Features - Industry standard footprint MTBF >1.4 million hours (Bellcore 332) - Input voltage to ETS300-132-2 - Adjustable output voltage - No minimum load required - Separate case ground pin - 2:1 input range for battery powered applications - Undervoltage lockout (UVLO) - UL, VDE and CSA safety approvals - Available Ro HS pliant - 2 year warranty Voltage adjustability: Setpoint accuracy: Line regulation Load regulation Minimum load Overshoot Undershoot Ripple and noise 5 Hz - 20 MHz (see note 1) Temperature coefficient Transient response (see note 2) Remote sense Low line to high line Full load to min. load At turn on and turn-off 3.3 V and 5 V 12V and 15 V 60% to 110% ±1.0% ±0.5% ±0.10% 0% None None 75 m V pk-pk, 20 m V rms 100 m V pk-pk, 30 m V rms ±0.01% / ºC ±2.0% max. deviation 170 μsrecovery to within ±1.0% 0.5 Vdc transmission line drop pensation Safety VDE0805/EN60950/IEC950 UL1950 CSA C22.2 No. 950 Embedded Power for Business-Critical Continuity Input Input voltage range Input current Input current (max.) (See note 4) Input reflected ripple Active low remote ON/OFF Logic patiblity ON OFF Undervoltage lockout: 24 Vin nominal 48 Vin nominal No load Remote OFF 24 Vin 48 Vin (See note 6) (See note 7) Open collector ref to -input 1.2 Vdc max. Open circuit 24 Vin: power-up 24 Vin: power-down 48 Vin: power-up 48 Vin: power-down Power-up Remote ON/OFF 17 V 16.3 V 34 V 32.5 V 20 ms 20 ms Level A Level A Level A See table 1500 Vdc 1500 Vdc 1500 Vdc 500 k Hz typ. VDE0805, EN60950, IEC950 UL1950, CSa c22.2 No. 950 18 - 36 Vdc 36 - 75 Vdc 130 m A max. 20 m A max. 9.0 A max. @ lo max. and Vin = 0 to 75 V 6.5 A max. @ lo max. and Vin = 0 to 75 V 5 m A pk-pk Rev.05.13.08 bxb150 2 of 4 Startup time (see note 8) EMC Charateristics Conducted emissions (see note 3) Bellcore 1089 FCC part 15 EN55022, CISPR22 General Specifications Efficiency Isolation voltage Input/case Input/output Output/case Fixed Switching frequency Approvals and standards (see note 5) Case material...