BXB75-48D3V32V5FHJ Datasheet | Emerson

Features - Industry standard footprint MTBF >1.4 million hours (Bellcore 332) - Input voltage to ETS300-132-2 - Adjustable output voltage - No minimum load required - Separate case ground pin - 2:1 input range for battery powered applications - Undervoltage lockout (UVLO) - UL, VDE and CSA safety approvals - Available Ro HS pliant - 2 year warranty The BXB75 Series are high power density dc-dc converters packaged in the industry standard footprint (2.40 x 2.28 x 0.50 inches) to give designers optimum choices when specifying for both new and replacement designs. Suitable for a wide range of applications in nearly any industry, the BXB75 was particularly designed with munication and distributed power applications in mind. Using Bellcore 332, the MTBF is greater than 1,400,000 hours. Aluminum baseplate technology with four threaded M3 inserts makes heatsink attachment and optimum thermal management easy. The BXB75 series is approved to IEC950 by UL, CSA and VDE. Safety VDE0805/EN60950/IEC950 File No. 10401-3336-0205 UL1950 File No. E136005 CSA C22.2 No. 950 File No. LR41062C Embedded Power for Business-Critical Continuity Specifications All specifications are typical at nominal input, full load at 25°C unless otherwise stated. Rev.03.08.07 bxb75s 2 of 4 OUTPUT SPECIFICATIONS Voltage adjustability Set point accuracy Line regulation Load regulation Minimum load Overshoot Undershoot Ripple and noise (5 Hz to 20 MHz) (See Note 1) Temperature coefficient Transient response (See Note 2) Remote sense INPUT SPECIFICATIONS Input voltage range Input current Input current (max.) (See Note 4) Input reflected ripple (See Note 6) 48 Vin nominal No load Remote OFF 36-75 Vdc 100 m A max. 20 m A max. 3.5 A max. @ Io max. and Vin = 0-75 V 5 m A pk-pk Open collector ref to -input 1.2 Vdc max. Open circuit 3.3 V and 5 V 12 V At turn-on and turn-off Low line to high line Full load to min. load 60% to 110% ±1.0% ±0.05% ±0.10% 0% None None 75 m V pk-pk, 20 m V rms 100 m V pk-pk, 30 m V rms...