BXF300-24S28N76Y Datasheet | Emerson

feature -rich specifications make them suitable for a very wide range of applications. Using Bellcore 332, the MTBF is over 1,000,000 hours. Aluminium baseplate technology and four threaded M3 inserts make heatsink attachment and thermal management easy. The BXF300 Series is approved by UL, CSA and VDE. SPECIFICATION OUTPUT SPECIFICATIONS Voltage adjustability Set point accuracy Line regulation Load regulation Minimum load Overshoot Undershoot Ripple and noise Temperature coefficient Transient response Remote sense INPUT SPECIFICATIONS Input voltage range Input current Input current (max.) Input reflected ripple All specifications are typical at nominal input, full load at 25°C unless otherwise stated EMC CHARACTERISTICS Model specific ±0.5% typ., ±1.6% max. Conducted emissions (See Note 8) Bellcore 332 FCC part 15 EN55022, CISPR22 Level A Level A Level A Low line to high line Full load to min. load ±0.10% typ. ±0.15% typ. 0% 0V GENERAL SPECIFICATIONS Efficiency Isolation voltage Input/case Input/output Output/case Fixed See table 1500VDC 1500VDC 1500VDC 850k Hz typ. VDE0805, EN60950, IEC950 UL1950, CSA C22.2 No. 950 Aluminium baseplate and plastic casing UL94V-0 200g (7.06oz) Bellcore 332 MIL-HDBK-217F @ 40°C, 100% FL >1,000,000 hours >200,000 hours At turn-on and turn-off 5Hz to 20MHz (See Note 1) 0V 20m V ±0.01%/°C Switching frequency Approvals and standards (See Note 4) Case material Material flammability Weight MTBF Recovery time (See Note 2) Peak deviation 500µs 500m V 0.5VDC transmission line drop pensation 48Vin nominal No load Remote OFF (See Note 3) (See Note 5) 36 to 75VDC 100m A max. 20m A max. 9A max. 26m A pk-pk (See Note 7) 1.2VDC max. Open circuit 34.8V 33.1V 15ms 13ms Altitude Vibration ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating case temp. -40°C to +100°C Non-operating -55°C to +125°C Operating Non-operating 5Hz to 500Hz 10,000 feet max. 40,000 feet max. 2.4G rms (approx.) Active low remote ON/OFF Logic patibility ON OFF...