LPQ353-CF
Features
- -
- -
- -
- -
- -
- -
- -
- - Active power factor correction IEC EN61000-3-2 pliance Remote sense on 1st and 4th output Power fail and remote inhibit Single wire current sharing Built-in EMI filter Adjustable floating 4th output 2 Supervisory output 5 V and 12 V Overvoltage protection Overload protection Thermal overload protection DC power good 135 khz switching frequency Cover -C Optional with fan cover -CF Optional end-mounted fan -CEF
Output
Maximum power Adjustment range Supervisory output Hold-up time Overload protection Overvoltage protection With cover: 350 W with 30 CFM forced air, (-C) (-CF) (-CEF) ± 5% min. on main: 3.3-24 V on output 4 5 V @ 500 m A regulated, 12 @ 150 m A x2 20 ms @ 350 W load, 115 VAC nominal line Short circuit protection on all outputs. Case overload protected @ 110-145% above peak rating 5 V output: 5.7-6.7 VDC.
Logic Control
Power failure Remote on/off DC-OK Remote sense TTL logic signal goes high 50-150 msec after 5 V output. It goes low...
