LPS352-CEF
Features
- -
- -
- -
- -
- -
- -
- -
- - Active power factor correction IEC EN6100-3-2 pliance Remote sense Power fail and remote inhibit Single wire current sharing Built-in EMI filter Low output ripple Supervisory output 5 V and 12 V Overvoltage protection Overload protection Thermal overload protection DC power good Cover -C 130 KHz switching frequency Optional with fan cover -CF Optional end-mounted fan
- CEF
Output
Maximum power With cover: 350 W with 30 CFM forced air, (-C) (-CF) (-CEF) 2:1 wide ratio 5 V @ 500 m A regulated, 12 V @ 150 20 ms @ 350 W load, 115 VAC nominal line at factory voltage setting Short circuit protection on all outputs. Case overload protected @ 110-145% above peak rating 5 V output: 5.7-6.7 VDC. Other models 10% to 25% above nominal output TTL logic signal goes high 50-150 msec after 5 V output. It goes low at least 4 msec before loss of regulation Requires an external contact (N.O or N.C) to inhibit outputs TTL logic goes high 50-150 msec after the...
