NTS506 Datasheet | Emerson

Embedded Power for Business-Critical Continuity NTS500 Series 500 Watts Total Power: Input Voltage: # of Outputs: 200 - 500 Watts 85 - 264 Vac 120 - 300 Vdc Single Rev. 09.8.09_#87 NTS500 Series of 3 Special Features - - - - - - - - - - - - - - - - - - - Active power factor correction IEC EN61000-3-2 pliance Remote sense Power fail and remote inhibit Single wire current sharing Built-in EMI filter Low output ripple 5 V standby 12 V fan output Overvoltage protection Overload protection Thermal overload protection DC power good Built in OR-ing diode / FET Optional fan cover (-CF suffix) PM Bus pliant Digital I2C interface 2 year warranty POE isolation on NTS508 Electrical Specifications Input Input ra­nge: Frequency: Inrush current: Efficiency: EMI filter: 85 - 264 Vac (wide range) 47 - 63 Hz 50 A max., cold start @ 25 °C 85% typical at full load, nominal line FCC Class B conducted and radiated; CISPR22 Class B conducted and radiated; EN55022 Class B conducted and radiated; VDE0878PT3 Class B conducted and radiated. < 0.5 m A @ 50/60 Hz, 264 Vac input Safety ground leakage current: Output Maximum power: Adjustment range: Standby output: Fan output: Hold-up time: Overload protection: 200 W for convection; 500 W with 30 CFM forced air ± 5% 5 V @ 1 A convection, 2 A forced air, regulated, ± 5% 12 V @ 1 A, -5 %, +7%, 0.5 A for -CF version 20 ms @ 500 W load, 115 VAC nominal line at factory voltage setting Short circuit protection on all outputs. Case overload protected @ 115 - 130% above peak rating Safety - -...