PTH05020W Datasheet | Emerson

PTH05020 5 Vin single output DC-DC CONVERTERS - - - - - - - - - - - POLA Non-isolated NEW Product 1 22 A output current 5 V input voltage Wide-output voltage adjust (0.8 Vdc to 3.6 Vdc) Auto-track™ sequencing- Margin up/down controls Pre-bias start-up capability Efficiencies up to 96% Output ON/OFF inhibit Output voltage sense Point-of-Load-Alliance (POLA) patible Available RoHS pliant The PTH05020 is a next generation series of non-isolated dc-dc converters offering some of the most advanced POL Features available in the industry. The primary new feature provides for sequencing between multiple modules, a function, which is being a necessity for powering advanced silicon including DSP’s, FPGA’s and ASIC’s requiring controlled power-up and power-down Other industry leading Features include margin up/down controls, pre-bias start-up capability and efficiencies up to 96%. The PTH05020 has an input voltage of 4.5 Vdc to 5.5 Vdc and offers a wide 0.8 Vdc to 3.6 Vdc output voltage range with up to 22 A output current, which allows for maximum design flexibility and a pathway for future upgrades. All specifications are typical at nominal input, full load at 25 °C unless otherwise stated Cin = 1000 µF, Cout = 0 µF OUTPUT SPECIFICATIONS Voltage adjustability Setpoint accuracy Line regulation Load regulation Total regulation Minimum load Ripple and noise 20 MHz bandwidth (See Note 4) 0.8-3.6 Vdc ±2.0% Vo ±5 mV typ. ±5 mV typ. ±3.0% Vo 0A 20 mV pk-pk ±0.5% Vo GENERAL SPECIFICATIONS Efficiency Insulation voltage Switching frequency Approvals and standards Material flammability Dimensions Weight (See Note 3) No load (See Note 1) 4.5-5.5 Vdc 10 mA typ. Positive logic 1 V/ms 3.7-4.3 Vdc typ. Pin 8 (See Note 6, 7) ±0.3 Vin PROTECTION Short-circuit Thermal International...