PTH12010L Datasheet | Emerson

Features - 12 A output current - 12 V input voltage - Wide-output voltage adjust - 1.2 Vdc to 5.5 Vdc for suffix ‘W’ and 0.8 Vdc to 1.8 Vdc for suffix ‘L’ - Auto-track™ sequencing- - Margin up/down controls - Efficiencies up to 94% - Output ON/OFF inhibit - Output voltage sense - Point-of-Load-Alliance (POLA) patible - Available Ro HS pliant - 2 Year Warranty Input Input voltage range: Input current: Remote ON/OFF: Start-up time: Undervoltage lockout: Track input voltage: Pin 8 (See Note 6) Suffix ‘-W’ Suffix ‘-L’ (See Note 3) No load (See Note 1) 10.8 - 13.2 Vdc 10 m A typ. Positive logic 1 V/ms 9.0 - 9.5 V typ. ± 0.3 Vin 1.2 - 5.5 Vdc 0.8 - 1.8 Vdc ± 2.0% Vo ± 10 m V typ. ± 12 m V typ. ± 3.0% Vo 0A 20 MHz bandwidth -40 °C to +85 °C 25 m V pk-pk ± 0.5% Vo 70 µs recovery time Overshoot/undershoot 100 m V ± 5.0% Vo Output Voltage adjustability: (See Note 4) Setpoint accuracy: Line regulation: Load regulation: Total regulation: Minimum load: Ripple and noise: Temperature co-efficient: Transient response: (See Note 5) Margin adjustment: Safety - UL/c UL CAN/CSA-C22.2 No. 60950-1-03/UL 60950-1, File No. E174104 - TÜV Product Service B 04 06 38572 044 (EN60950) Certificate No. All specifications are typical at nominal input, full load at 25 °C unless otherwise stated Cin = 560 µF, Cout = 0 µF - Auto-track™ is a trade mark of Texas Instruments - CB Report and Certificate to IEC60950, Certificate No. US/8292/UL Embedded Power for Business-Critical Continuity Rev. 2.16.09_115 PTH12010 Series of 6 EMC Characteristics Electrostatic discharge: Conducted immunity: Radiated immunity: EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3 General Specifications Efficiency: Insulation voltage: Switching frequency: Approvals and standards: Material flammability: Dimensions: Weight: MTBF Telcordia SR-332 (L x W x H) Suffix ‘-W’ Suffix ‘-L’ See tables on page 3 Non-Isolated 300 k Hz to 400 k Hz 200 k Hz to...