PTH12010Y Datasheet | Emerson

Features - VTT bus termination output (output the system VREF) - 15 A output current - 3.3, 5 or 12 Vdc input voltage - DDR and QDR patible - ON/OFF inhibit (for VTT standby) - Under-voltage lockout - Operating temperature range: -40 °C to +85 °C - Efficiencies up to 91% - Output overcurrent protection (non-latching, auto-reset) - Point-of-Load-Alliance (POLA) patible - Available Ro HS pliant - 2 Year Warranty Specifications Input Input voltage range: PTH03010Y PTH05010Y PTH12010Y No load 2.95 - 3.65 Vdc 4.5 - 5.5 Vdc 10.8 - 13.2 Vdc 10 m A Positive logic Vin increasing Vin decreasing Vin increasing Vin decreasing Vin increasing Vin decreasing PTH03010Y & PTH05010Y PTH12010Y 2.45 V typ., 2.80 V max. 2.20 V min., 2.40 V typ. 4.30 V typ., 4.45 V max. 3.40 V min., 3.70 V typ. 9.5 V typ., 10.4 V max. 8.80 V min., 9.0 V typ. 470 µF 560 µF Input current: Remote ON/OFF: Undervoltage lockout: PTH03010Y PTH05010Y PTH12010Y Input capacitance: (See Note 3) All specifications are typical at nominal input, Vref = 1.25 V, full load at 25˚C unless otherwise stated. Cin, Co1 and Co2 = typical value Safety - UL/c UL CAN/CSA-C22.2 No. 60950, File No. E174104 - - TÜV Product Service (EN60950) Certificate No. B 04 06 38572 044 CB Report and Certificate to IEC60950, Certificate No. US/8292/UL Embedded Power for Business-Critical Continuity Rev.2.16.09_147 PTHxx010Y of 5 Output Output current: (over - VREF range) (See Note 1) Tracking range for VREF: Tracking tolderance to VREF (VTT - VREF) (over line, load & temperature) Ripple and noise: Load transient response: (See Note 4) Output capacitance: Non-ceramic values (See Notes 4 & 5) Ceramic values (See Note 4) (See Note 6) PTH03010Y PTH05010Y PTH12010Y PTH03010Y PTH05010Y PTH12010Y ESR (non-ceramic) 470 - - - - - - - - - - - - - - - - - - -...