PTH12030W Datasheet | Emerson

Features - 26 A output current - 12 V input voltage - Wide-output voltage adjust - 1.2 Vdc to 5.5 Vdc for suffix ‘W’ and 0.8 Vdc to 1.8 Vdc for suffix ‘L’ - Auto-track™ sequencing- - Margin up/down controls - Efficiencies up to 94.5% - Output ON/OFF inhibit - Output voltage sense - Point-of-Load-Alliance (POLA) patible - Available Ro HS pliant - 2 Year Warranty Input Input voltage range: Input current: Remote ON/OFF: Start-up time: Undervoltage lockout: Track input voltage: Pin 11 (See Note 6, page 3) Suffix ‘-W’ Suffix ‘-L’ (See Note 3, page 3) No load (See Note 1, page 3) 10.2 - 13.8 Vdc 10 m A typ. Positive logic 1 V/ms 8.5 - 9.5 V typ. ± 0.3 Vin 1.2 - 5.5 Vdc 0.8 - 1.8 Vdc ± 2.0% Vo ± 5 m V typ. ± 5 m V typ. ± 3.0% Vo 0A Suffix ‘-W’ Suffix ‘-L’ -40 °C to +85 °C 25 m V pk-pk 15 m V pk-pk ± 0.5% Vo 50 µs recovery time Overshoot/undershoot 150 m V ± 5.0% Vo Output Voltage adjustability: (See Note 4, page 3) Setpoint accuracy: Line regulation: Load regulation: Total regulation: Minimum load: Ripple and noise: 20 MHz bandwidth (See Note 8, page 3) Temperature co-efficient: Transient response: (See Note 5, page 3) Margin adjustment: Safety - UL/c UL CAN/CSA-C22.2 No. 60950-1-03/UL 60950-1, File No. E174104 - TÜV Product Service B 04 06 38572 044 (EN60950) Certificate No. All specifications are typical at nominal input, full load at 25 °C unless otherwise stated Cin = 560 µF, Cout = 0 µF - Auto-track™ is a trade mark of Texas Instruments - CB Report and Certificate to IEC60950, Certificate No. US/8292/UL Embedded Power for Business-Critical Continuity Specifications Continued EMC Characteristics Electrostatic discharge: Conducted immunity: Radiated immunity: EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3 Rev. 3.10.09_167 PTH12030 Series of 5 General Specifications Efficiency: Insulation voltage: Switching frequency: Approvals and standards: Material flammability: Dimensions: Weight:...